TI TLC1079CDRG4

Manufacturer No:

TLC1079CDRG4

Manufacturer:

Package:

Description:

4 Channels 30mA per Channel 60pA 70 dB Instrumentational OP Amps 0.00006?A 14 Pins D

Quantity:

Delivery:

Payment:

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

TLC1079CDRG4 information

TI TLC1079CDRG4 technical specifications, attributes, parameters and parts with similar specifications to TI TLC1079CDRG4.

Type
Parameter

Package / Case
D

Surface Mount
YES

Number of Pins
14

Packaging
Tape & Reel

JESD-609 Code
e4

Pbfree Code
yes

Moisture Sensitivity Level (MSL)
1 (Unlimited)

Number of Terminations
14

ECCN Code
EAR99

Max Operating Temperature
70°C

Min Operating Temperature
0°C

Subcategory
Operational Amplifier

Technology
CMOS

Terminal Form
GULL WING

Peak Reflow Temperature (Cel)
260

Number of Functions
4

Supply Voltage
5V

Terminal Pitch
1.27mm

Pin Count
14

Power Supplies
5/10V

Temperature Grade
COMMERCIAL

Number of Channels
4

Max Supply Voltage
16V

Min Supply Voltage
1.4V

Nominal Supply Current
92?A

Current - Output
20mA

Slew Rate
0.047 V/?s

Amplifier Type
OPERATIONAL AMPLIFIER

Common Mode Rejection Ratio
70 dB

Current - Input Bias
60pA

Output Current per Channel
30mA

Input Offset Voltage (Vos)
200?V

Bandwidth
110 kHz

Gain Bandwidth Product
85 kHz

Unity Gain BW-Nom
85 kHz

Voltage Gain
114.4dB

Average Bias Current-Max (IIB)
0.00006?A

Low-Offset
NO

Frequency Compensation
YES

Low-Bias
YES

Micropower
YES

Bias Current-Max (IIB) @25C
0.00006?A

Nominal Gain Bandwidth Product
85 kHz

Max I/O Voltage
850?V

Length
8.65mm

Height Seated (Max)
1.75mm

Radiation Hardening
No

Download datasheets and manufacturer documentation for TI TLC1079CDRG4.

TLC1079CDRG4 Overview

Packaged in a D case, the buffer op amp is ready to use. An op amp ic of the OPERATIONAL AMPLIFIER type. The op amp is delivered to you in a Tape & Reel case. There is a growing number of terminations approaching the number of 14. The pins on this board total to 14 in total. I would like to remind you that this buffer op amp should be powered by an 5V battery. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. A total of 14 pins are present on the instrumentation amplifier. There is an input offset voltage of 200?V for this buffer op amp. As long as the supply current of the chip does not exceed 57?A, this op amp ic can operate. 114.4dB should remain the voltage gain. As far as the device is concerned, buffer amplifier has 4 channels. For the buffer op amp to operate properly, it must be above the temperature of 0°C degrees Celsius. No temperature greater than 70°C should be used. In terms of the supply voltage, this electrical part is capable of operating at low voltage levels of under 16V. A high supply voltage of more than 1.4V is recommended for the instrumentation amplifier's supply voltage.

TLC1079CDRG4 Features

14 Pins
supply voltage of 5V
114.4dB voltage gain

TLC1079CDRG4 Applications

There are a lot of Texas Instruments
TLC1079CDRG4 Instrumentational OP Amps applications.

Integrator circuits
Differentiator circuits
Logarithmic operation circuits
Exponential operation circuits
Multiplication circuits
Division circuits
Precision measurement
Power control
Information processing
Weak signal detection

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step4：Individual Package

Step5：Anti-collision Filling

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.