TI TLC074IPWPG4

Manufacturer No:

TLC074IPWPG4

Manufacturer:

Package:

HTSSOP EP

Description:

4 Channels 57mA per Channel 50pA 80 dB Instrumentational OP Amps 0.0007μA 8V 20 Pins HTSSOP EP

Quantity:

Delivery:

Payment:

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

TLC074IPWPG4 information

TI TLC074IPWPG4 technical specifications, attributes, parameters and parts with similar specifications to TI TLC074IPWPG4.

Type
Parameter

Package / Case
HTSSOP EP

Surface Mount
YES

Number of Pins
20

JESD-609 Code
e4

Pbfree Code
yes

Moisture Sensitivity Level (MSL)
2 (1 Year)

Number of Terminations
20

ECCN Code
EAR99

Terminal Finish
Nickel/Palladium/Gold (Ni/Pd/Au)

Max Operating Temperature
125°C

Min Operating Temperature
-40°C

Subcategory
Operational Amplifier

Packing Method
TUBE

Technology
BIMOS

Terminal Position
DUAL

Terminal Form
GULL WING

Peak Reflow Temperature (Cel)
260

Number of Functions
4

Supply Voltage
5V

Terminal Pitch
0.65mm

Pin Count
20

Operating Supply Voltage
8V

Temperature Grade
AUTOMOTIVE

Number of Channels
4

Min Supply Voltage
4.5V

Operating Supply Current
2.1mA

Nominal Supply Current
11.6mA

Current - Output
57mA

Slew Rate
16 V/μs

Architecture
VOLTAGE-FEEDBACK

Amplifier Type
OPERATIONAL AMPLIFIER

Common Mode Rejection Ratio
80 dB

Current - Input Bias
50pA

Output Current per Channel
57mA

Input Offset Voltage (Vos)
390μV

Bandwidth
10MHz

Gain Bandwidth Product
10MHz

Unity Gain BW-Nom
10000 kHz

Voltage Gain
120dB

Average Bias Current-Max (IIB)
0.0007μA

Low-Offset
NO

Frequency Compensation
YES

Max Dual Supply Voltage
8V

Low-Bias
YES

Micropower
NO

Min Dual Supply Voltage
2.25V

Bias Current-Max (IIB) @25C
0.00005μA

Download datasheets and manufacturer documentation for TI TLC074IPWPG4.

TLC074IPWPG4 Overview

There is a HTSSOP EP case in which the instrumentation amplifier is packaged. Buffer amps of this type are called OPERATIONAL AMPLIFIER-types. The number of terminations is approaching the 20 mark. The total number of pins on linear amplifier is 20. The linear amplifier should be run at 5V at all times, so please keep that in mind when using it. In order to be more specific, this instrumentation amplifier is one of the types of Operational Amplifier devices. 20 pins are included on the operational amplifiers. As far as the input offset voltage is concerned, linear amplifier rates at 390μV. It is possible to operate this buffer amplifier from a supply current of 2.1mA . 120dB should be the voltage gain. Op amp ic has 4 channels. In order for this buffer op amp to function, it should have a temperature of at least -40°C degrees Celsius. At temperatures greater than 125°C, Instrumentation amplifier should not be used. The operating supply voltage of the buffer op amp is rated at 8V. For the packing of the instrumentation amplifier, TUBE is adopted. The electrical part is capable of being powered by a voltage of under 16V, which means that it can be used with any voltage supply. As a rule of thumb, the supply voltage of the op amp should not be lower than 4.5V. As a general rule, you should conduct this electronic component under dual supply voltages of 8V volts.

TLC074IPWPG4 Features

20 Pins
supply voltage of 5V
120dB voltage gain

TLC074IPWPG4 Applications

There are a lot of Texas Instruments
TLC074IPWPG4 Instrumentational OP Amps applications.

Subtraction operation circuits
single/dual op amp sum and difference circuits
Integrator circuits
Differentiator circuits
Logarithmic operation circuits
Exponential operation circuits
Multiplication circuits
Division circuits
Precision measurement
Power control

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step4：Individual Package

Step5：Anti-collision Filling

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.