TI TL974IDRG4

Manufacturer No:

TL974IDRG4

Manufacturer:

Package:

Description:

4 Channels 80mA per Channel 750nA 60 dB Instrumentational OP Amps 1μA 6V 14 Pins D

Quantity:

Delivery:

Payment:

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

TL974IDRG4 information

TI TL974IDRG4 technical specifications, attributes, parameters and parts with similar specifications to TI TL974IDRG4.

Type
Parameter

Package / Case
D

Surface Mount
YES

Number of Pins
14

Packaging
Tape & Reel

JESD-609 Code
e4

Pbfree Code
yes

Moisture Sensitivity Level (MSL)
1 (Unlimited)

Number of Terminations
14

ECCN Code
EAR99

Max Operating Temperature
125°C

Min Operating Temperature
-40°C

Subcategory
Operational Amplifier

Technology
BIPOLAR

Terminal Form
GULL WING

Peak Reflow Temperature (Cel)
260

Number of Functions
4

Supply Voltage
2.5V

Terminal Pitch
1.27mm

Pin Count
14

Operating Supply Voltage
6V

Power Supplies
+-2.5V

Temperature Grade
AUTOMOTIVE

Number of Channels
4

Max Supply Voltage
12V

Operating Supply Current
2mA

Nominal Supply Current
11.2mA

Slew Rate
5 V/μs

Amplifier Type
OPERATIONAL AMPLIFIER

Common Mode Rejection Ratio
60 dB

Current - Input Bias
750nA

Output Current per Channel
80mA

Input Offset Voltage (Vos)
1mV

Bandwidth
12MHz

Gain Bandwidth Product
12MHz

Neg Supply Voltage-Nom (Vsup)
-2.5V

Unity Gain BW-Nom
12000 kHz

Voltage Gain
80dB

Average Bias Current-Max (IIB)
1μA

Low-Offset
NO

Frequency Compensation
YES

Max Dual Supply Voltage
6V

Min Dual Supply Voltage
1.35V

Bias Current-Max (IIB) @25C
0.75μA

Nominal Gain Bandwidth Product
12MHz

Max I/O Voltage
4mV

Length
8.65mm

Height Seated (Max)
1.75mm

Download datasheets and manufacturer documentation for TI TL974IDRG4.

TL974IDRG4 Overview

In order to protect the op amps, a D case is used. There are two types of operational amplifiers in this circuit. In the case of Tape & Reel cases, linear amplifier will be delivered. In recent months, the number of terminations has approached 14. It consists of a total of 14 pins in total. It would be helpful if you could remember that this op amp ic should be powered by an 2.5V battery. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. It has 14 pins that make up the linear amplifier. In terms of input offset voltage, operational amplifier rates 1mV. In order for this instrumentation amplifier to operate, the supply current needs to be between 2mA and 10 . Maintain 80dB as the voltage gain. Buffer op amp is equipped with 4 channels on the device. It is recommended that the temperature of this op amp ic should not fall below -40°C degrees Fahrenheit at any time. Linear amplifier shouldn't be used above 125°C degrees. The operating supply voltage of the buffer op amp is rated at 6V. When it comes to the voltage from which this electrical part will operate, it can operate at a maximum of less than 12V. It is recommended that you keep the instrumentation amplifier's supply voltage higher than 2.7V when using it. It is recommended that you conduct this electronic part using the dual supply voltage of 6V.

TL974IDRG4 Features

14 Pins
supply voltage of 2.5V
80dB voltage gain

TL974IDRG4 Applications

There are a lot of Texas Instruments
TL974IDRG4 Instrumentational OP Amps applications.

Differentiator circuits
Logarithmic operation circuits
Exponential operation circuits
Multiplication circuits
Division circuits
Precision measurement
Power control
Information processing
Weak signal detection
Signal amplification

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step4：Individual Package

Step5：Anti-collision Filling

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.