TI TL5001CPS

Manufacturer No:

TL5001CPS

Manufacturer:

Package:

8-SOIC (0.209, 5.30mm Width)

Description:

8 Terminals 3.6V~40V 8-Pin TL5001 DC to DC converter IC SWITCHING CONTROLLER 1 Outputs 20kHz~500kHz Transistor Driver

Quantity:

Delivery:

Payment:

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

TL5001CPS information

TI TL5001CPS technical specifications, attributes, parameters and parts with similar specifications to TI TL5001CPS.

Type
Parameter

Lifecycle Status
ACTIVE (Last Updated: 1 day ago)

Factory Lead Time
6 Weeks

Mounting Type
Surface Mount

Package / Case
8-SOIC (0.209, 5.30mm Width)

Surface Mount
YES

Number of Pins
8

Weight
122.611688mg

Operating Temperature
-20°C~85°C TA

Packaging
Tube

JESD-609 Code
e4

Pbfree Code
yes

Part Status
Active

Moisture Sensitivity Level (MSL)
1 (Unlimited)

Number of Terminations
8

ECCN Code
EAR99

Terminal Finish
Nickel/Palladium/Gold (Ni/Pd/Au)

Terminal Position
DUAL

Terminal Form
GULL WING

Peak Reflow Temperature (Cel)
260

Base Part Number
TL5001

Function
Step-Up, Step-Down, Step-Up/Step-Down

Number of Outputs
1

Output Voltage
50V

Output Type
Transistor Driver

Operating Supply Voltage
40V

Input Voltage-Nom
6V

Analog IC - Other Type
SWITCHING CONTROLLER

Output Configuration
Positive

Output Current
20mA

Voltage - Supply (Vcc/Vdd)
3.6V~40V

Quiescent Current
1.1mA

Control Features
Dead Time Control, Frequency Control

Max Output Voltage
50V

Topology
Buck, Boost, Flyback

Min Input Voltage
3.6V

Control Mode
VOLTAGE-MODE

Frequency - Switching
20kHz~500kHz

Max Input Voltage
40V

Control Technique
PULSE WIDTH MODULATION

Synchronous Rectifier
No

Min Output Voltage
1V

Switcher Configuration
SINGLE

Max Frequency
500kHz

Duty Cycle (Max)
100%

Height
2mm

Length
6.2mm

Width
5.3mm

Download datasheets and manufacturer documentation for TI TL5001CPS.

TL5001CPS Overview

In the 8-SOIC (0.209, 5.30mm Width) package, the switching controller meets most application requirements. There is sufficient capacity to generate switching controller for outputs 1. There is a Tube solid enclosure around the pmic. With this function, you can deal with Transistor Driver dc switching's outputs (s). DC control operates at 3.6V~40V volts and has 3.6V~40V supply voltage. Suitable for working in an dc switcher that has a -20°C~85°C TA. It can switch at 20kHz~500kHz. As it has a Surface Mount value, it can be used for general dc dc regulator. To provide efficient switching control, Dead Time Control, Frequency Control is included in the dcdc regulator. A SWITCHING CONTROLLER analog integrated circuit is connected to the switch converters. DUAL are the position of the terminal of the switching converters. Various 8 terminations. This dc dc converter ic uses a variety of control techniques, including PULSE WIDTH MODULATION. There is a DC switcher's nominal voltage of 6V. In addition to "TL5001", there are other relevant dc to dc converter ics you can find. There are 8 pins on switching converter. DC regulator outputs 50V voltage based on test statistics. A starting point for a project is to note down the dc dc regulator's usual output current, which is 20mA. DC regulator500kHz has the maximum frequency. In order for the voltage regulator dc to dc to perform safely and reliably in a circuit, users are advised to apply 40V. In dormant mode, 1.1mA is used. Since the dc switcher's maximum input voltage is 40V, the voltage must be regulated accordingly. Voltage 3.6V must be supplied. An output current greater than 3A cannot be provided by the dc switcher. Depending on the datasheet, the switching converter can output 50V volts at its peak. A voltage controller's lowest output voltage cannot be less than 1V.

TL5001CPS Features

Transistor Driver Outputs
Switching Frequency: 20kHz~500kHz
Dead Time Control, Frequency Control
PULSE WIDTH MODULATION

TL5001CPS Applications

There are a lot of Texas Instruments
TL5001CPS DC to DC converter applications.

Network technology
Automation technology
CMM
Various precision measuring instruments
Various precision measuring detectors
Flaw detection equipment
Balance equipment
Industrial robots
Industrial controllers
Die casting equipment

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step4：Individual Package

Step5：Anti-collision Filling

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.