TI TL5001CP

TL5001CP Overview

As a result of 8-DIP (0.300, 7.62mm) compact design, the switching controller is compatible with most applications. 1 outputs are supported by the dc motor controller. An enclosure of Tube is used to package the PMIC. The system can process Transistor Driver dc switching's outputs (s). 3.6V~40V is the supply voltage and the operating voltage of the dc control. Workable in an dc switcher where -20°C~85°C TA is the -20°C~85°C TArm. The switching controller is capable of switching at the 20kHz~500kHz position. dc dc regulator can be generalized using Through Hole. Switching control is made easier with the dcdc regulator's Dead Time Control, Frequency Control. Connected to a SWITCHING CONTROLLER analog IC, the switch converters are connected to a power supply. switching converters terminal (s) are designed to be at DUAL. There are many different types of terminations for 8. Some of the control techniques used by these dc dc converter ics are PULSE WIDTH MODULATION. It is inputted with a DC switcher's voltage of 6V. A search for "TL5001" will reveal other relevant dc to dc converter ics. 8 pins are present on switching converter. Statistically, the DC regulator outputs 50V voltage. It's important to remember that the dc dc regulator's normaloutput current is 20mA, so you should note it down when starting a new project. Switching controller operates at 500kHz Hz. As long as the dc switching is in a dormant state, it utilizes 1.1mA. It is possible to set the input voltage as 6V for nominal working statuses. In order to limit the voltage of a dc switcher whose maximum input voltage is 40V, it must be limited by the user. Voltage 3.6V is necessary for the supply. Input current cannot exceed 3A with this dc switcher. At its maximum, the switching converter can output 50V volts. At its lowest voltage, the voltage controller does not produce less than 1V. There is a possibility that a current higher than 2.1mA will cause improper operation of the component and possibly damage switching voltage regulators.

TL5001CP Features

Transistor Driver Outputs
Switching Frequency: 20kHz~500kHz
Dead Time Control, Frequency Control
PULSE WIDTH MODULATION
Frequency: 500kHz

TL5001CP Applications

There are a lot of Texas Instruments
TL5001CP DC to DC converter applications.

• Automation technology
• CMM
• Various precision measuring instruments
• Various precision measuring detectors
• Flaw detection equipment
• Balance equipment
• Industrial robots
• Industrial controllers
• Die casting equipment
• Injection molding machinery