TI TL1454ACD

Manufacturer No:

TL1454ACD

Manufacturer:

Package:

16-SOIC (0.154, 3.90mm Width)

Description:

16 Terminals 3.6V~20V 16-Pin TL1454 DC to DC converter IC DUAL SWITCHING CONTROLLER 2 Outputs 50kHz~2MHz Transistor Driver

Quantity:

Delivery:

Payment:

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

TL1454ACD information

TI TL1454ACD technical specifications, attributes, parameters and parts with similar specifications to TI TL1454ACD.

Type
Parameter

Lifecycle Status
ACTIVE (Last Updated: 5 days ago)

Factory Lead Time
6 Weeks

Mount
Surface Mount

Mounting Type
Surface Mount

Package / Case
16-SOIC (0.154, 3.90mm Width)

Number of Pins
16

Weight
155.100241mg

Operating Temperature
-20°C~85°C TA

Packaging
Tube

JESD-609 Code
e4

Pbfree Code
yes

Part Status
Active

Moisture Sensitivity Level (MSL)
1 (Unlimited)

Number of Terminations
16

Termination
SMD/SMT

ECCN Code
EAR99

Terminal Finish
Nickel/Palladium/Gold (Ni/Pd/Au)

Subcategory
Switching Regulator or Controllers

Max Power Dissipation
950mW

Technology
BIPOLAR

Terminal Position
DUAL

Terminal Form
GULL WING

Peak Reflow Temperature (Cel)
260

Frequency
2MHz

Function
Step-Up, Step-Down, Step-Up/Step-Down

Number of Outputs
2

Output Voltage
4.5V

Output Type
Transistor Driver

Max Output Current
40mA

Input Voltage-Nom
6V

Analog IC - Other Type
DUAL SWITCHING CONTROLLER

Output Configuration
Positive, Isolation Capable

Power Dissipation
950mW

Output Current
30mA

Voltage - Supply (Vcc/Vdd)
3.6V~20V

Control Features
Dead Time Control, Frequency Control

Max Output Voltage
20V

Topology
Buck, Boost, Flyback

Min Input Voltage
3.6V

Control Mode
VOLTAGE-MODE

Frequency - Switching
50kHz~2MHz

Max Input Voltage
20V

Control Technique
PULSE WIDTH MODULATION

Synchronous Rectifier
Yes

Switcher Configuration
PHASE-SHIFT

Duty Cycle (Max)
100%

Clock Sync
No

Download datasheets and manufacturer documentation for TI TL1454ACD.

PCN Design/Specification:

texasinstruments-tl7726cdr-pcndesignspecification-4035.pdf

TL1454ACD Overview

In the 16-SOIC (0.154, 3.90mm Width) package, the switching controller meets most application requirements. There is sufficient capacity to generate switching controller for outputs 2. There is a Tube solid enclosure around the pmic. With this function, you can deal with Transistor Driver dc switching's outputs (s). DC control operates at 3.6V~20V volts and has 3.6V~20V supply voltage. Suitable for working in an dc switcher that has a -20°C~85°C TA. It can switch at 50kHz~2MHz. As it has a Surface Mount value, it can be used for general dc dc regulator. To provide efficient switching control, Dead Time Control, Frequency Control is included in the dcdc regulator. A DUAL SWITCHING CONTROLLER analog integrated circuit is connected to the switch converters. DUAL are the position of the terminal of the switching converters. Various 16 terminations. This dc dc converter ic uses a variety of control techniques, including PULSE WIDTH MODULATION. There is a DC switcher's nominal voltage of 6V. In addition to "TL1454", there are other relevant dc to dc converter ics you can find. There are 16 pins on switching converter. Specifically, switching converter falls under the Switching Regulator or Controllers category. DC regulator outputs 4.5V voltage based on test statistics. A starting point for a project is to note down the dc dc regulator's usual output current, which is 30mA. Because of DC switcher's Surface Mount, it is suitable for most prototype designs and applications. A frequency of 2MHz is set for the switching controller. Since the dc switcher's maximum input voltage is 20V, the voltage must be regulated accordingly. Voltage 3.6V must be supplied. An output current greater than 40mA cannot be provided by the dc switcher. Depending on the datasheet, the switching converter can output 20V volts at its peak.

TL1454ACD Features

Transistor Driver Outputs
Switching Frequency: 50kHz~2MHz
Dead Time Control, Frequency Control
PULSE WIDTH MODULATION
Frequency: 2MHz

TL1454ACD Applications

There are a lot of Texas Instruments
TL1454ACD DC to DC converter applications.

Network technology
Automation technology
CMM
Various precision measuring instruments
Various precision measuring detectors
Flaw detection equipment
Balance equipment
Industrial robots
Industrial controllers
Die casting equipment

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step4：Individual Package

Step5：Anti-collision Filling

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.