TI TL1453CD

TL1453CD Overview

As a result of 16-SOIC (0.154, 3.90mm Width) compact design, the switching controller is compatible with most applications. 2 outputs are supported by the dc motor controller. An enclosure of Tube is used to package the PMIC. The system can process PWM dc switching's outputs (s). 3.6V~40V is the supply voltage and the operating voltage of the dc control. Workable in an dc switcher where -20°C~85°C TA is the -20°C~85°C TArm. The switching controller is capable of switching at the 1kHz~500kHz position. dc dc regulator can be generalized using Surface Mount. Switching control is made easier with the dcdc regulator's Dead Time Control, Frequency Control. Connected to a SWITCHING CONTROLLER analog IC, the switch converters are connected to a power supply. switching converters terminal (s) are designed to be at DUAL. There are many different types of terminations for 16. Some of the control techniques used by these dc dc converter ics are PULSE WIDTH MODULATION. It is inputted with a DC switcher's voltage of 6V. A search for "TL1453" will reveal other relevant dc to dc converter ics. 16 pins are present on switching converter. The type is a particular Switching Regulator or Controllers of switching converter. Statistically, the DC regulator outputs 50V voltage. It's important to remember that the dc dc regulator's normaloutput current is 20mA, so you should note it down when starting a new project. As DC switcher has a Surface Mount, it's suitable for most applications and prototype designs. Switching controller operates at 500kHz Hz. A circuit should contain 40V in order to ensure the voltage regulator dc to dc runs safely and reliably. In total, thare switch converters have 2 functions. A voltage regulators switching with 16 pins is designed. In order to limit the voltage of a dc switcher whose maximum input voltage is 40V, it must be limited by the user. Voltage 3.6V is necessary for the supply. Input current cannot exceed 20mA with this dc switcher. At its maximum, the switching converter can output 50V volts.

TL1453CD Features

PWM Outputs
Switching Frequency: 1kHz~500kHz
Dead Time Control, Frequency Control
PULSE WIDTH MODULATION
Frequency: 500kHz

TL1453CD Applications

There are a lot of Texas Instruments
TL1453CD DC to DC converter applications.

• Automation technology
• CMM
• Various precision measuring instruments
• Various precision measuring detectors
• Flaw detection equipment
• Balance equipment
• Industrial robots
• Industrial controllers
• Die casting equipment
• Injection molding machinery