TI TL062CPW

Manufacturer No:

TL062CPW

Manufacturer:

Package:

8-TSSOP (0.173, 4.40mm Width)

Description:

2 Channels 30pA 70 dB Instrumentational OP Amps 0.01?A 18V 7V~36V ±3.5V~18V TL062 8 Pins 8-TSSOP (0.173, 4.40mm Width)

Quantity:

Delivery:

Payment:

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

TL062CPW information

TI TL062CPW technical specifications, attributes, parameters and parts with similar specifications to TI TL062CPW.

Type
Parameter

Lifecycle Status
ACTIVE (Last Updated: 1 week ago)

Factory Lead Time
6 Weeks

Mounting Type
Surface Mount

Package / Case
8-TSSOP (0.173, 4.40mm Width)

Surface Mount
YES

Number of Pins
8

Operating Temperature
0°C~70°C

Packaging
Tube

JESD-609 Code
e4

Pbfree Code
yes

Part Status
Active

Moisture Sensitivity Level (MSL)
1 (Unlimited)

Number of Terminations
8

ECCN Code
EAR99

Terminal Finish
Nickel/Palladium/Gold (Ni/Pd/Au)

Subcategory
Operational Amplifier

Technology
BIPOLAR

Terminal Position
DUAL

Terminal Form
GULL WING

Peak Reflow Temperature (Cel)
260

Number of Functions
2

Supply Voltage
15V

Terminal Pitch
0.65mm

Base Part Number
TL062

Operating Supply Voltage
18V

Power Supplies
+-15V

Number of Channels
2

Operating Supply Current
200?A

Nominal Supply Current
500?A

Slew Rate
3.5V/?s

Architecture
VOLTAGE-FEEDBACK

Amplifier Type
J-FET

Common Mode Rejection Ratio
70 dB

Current - Input Bias
30pA

Voltage - Supply, Single/Dual (±)
7V~36V ±3.5V~18V

Input Offset Voltage (Vos)
15mV

Bandwidth
1MHz

Neg Supply Voltage-Nom (Vsup)
-15V

Unity Gain BW-Nom
1000 kHz

Voltage Gain
75.56dB

Average Bias Current-Max (IIB)
0.01?A

Low-Offset
NO

Frequency Compensation
YES

Voltage - Input Offset
3mV

Low-Bias
YES

Micropower
YES

Bias Current-Max (IIB) @25C
0.0004?A

Download datasheets and manufacturer documentation for TI TL062CPW.

TL062CPW Overview

It is packaged in an 8-TSSOP (0.173, 4.40mm Width)-case that protects the operational amplifiers from damage. An op amp of this type is a J-FET-type. As far as the packaging is concerned, buffer op amp is delivered in a Tube case. It is estimated that there will be at least 8 terminations this year. A total of 8 pins are attached to buffer op amp. As a reminder, this buffer op amp should be powered by 15V battery and that the battery should be inserted in the amplifier. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. In total, the buffer amplifier consists of 8 pins. Op amp ic rates 15mV for input offset voltage. This electronic part is recommended for mounting type Surface Mount. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of 0°C~70°C. A supply current of 200?A can be used to operate this linear amplifier. There should be no change in the voltage gain at 75.56dB. There are a total of 2 channels available on the op amps. The operating supply voltage of the buffer op amp is rated at 18V.

TL062CPW Features

8 Pins
supply voltage of 15V
75.56dB voltage gain

TL062CPW Applications

There are a lot of Texas Instruments
TL062CPW Instrumentational OP Amps applications.

Logarithmic operation circuits
Exponential operation circuits
Multiplication circuits
Division circuits
Precision measurement
Power control
Information processing
Weak signal detection
Signal amplification
Signal filtering

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step4：Individual Package

Step5：Anti-collision Filling

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.