TI THS4222DGNRG4

Manufacturer No:

THS4222DGNRG4

Manufacturer:

Package:

HTSSOP EP

Description:

100mA per Channel 5μA 74 dB Instrumentational OP Amps 8 Pins HTSSOP EP

Quantity:

Delivery:

Payment:

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

THS4222DGNRG4 information

TI THS4222DGNRG4 technical specifications, attributes, parameters and parts with similar specifications to TI THS4222DGNRG4.

Type
Parameter

Package / Case
HTSSOP EP

Surface Mount
YES

Number of Pins
8

Weight
24.408939mg

Packaging
Tape and Reel

JESD-609 Code
e4

Pbfree Code
yes

Moisture Sensitivity Level (MSL)
1 (Unlimited)

Number of Terminations
8

ECCN Code
EAR99

Terminal Finish
Nickel/Palladium/Gold (Ni/Pd/Au)

Max Operating Temperature
85°C

Min Operating Temperature
-40°C

Subcategory
Operational Amplifier

Terminal Position
DUAL

Terminal Form
GULL WING

Peak Reflow Temperature (Cel)
260

Number of Functions
2

Terminal Pitch
0.65mm

Pin Count
8

Number of Elements
2

Temperature Grade
INDUSTRIAL

Max Supply Voltage
15V

Min Supply Voltage
2.7V

Operating Supply Current
14mA

Nominal Supply Current
36mA

Power Dissipation
1.71W

Slew Rate
975 V/μs

Amplifier Type
OPERATIONAL AMPLIFIER

Common Mode Rejection Ratio
74 dB

Current - Input Bias
5μA

Output Current per Channel
100mA

Input Offset Voltage (Vos)
10mV

Bandwidth
120MHz

Gain Bandwidth Product
120MHz

Voltage Gain
100dB

Power Supply Rejection Ratio (PSRR)
62dB

Settling Time
25 ns

Max Dual Supply Voltage
7.5V

-3db Bandwidth
230MHz

Min Dual Supply Voltage
1.35V

Max I/O Voltage
3mV

Length
3mm

Height Seated (Max)
1.07mm

Radiation Hardening
No

RoHS Status
RoHS Compliant

Lead Free
Contains Lead

Download datasheets and manufacturer documentation for TI THS4222DGNRG4.

THS4222DGNRG4 Overview

A HTSSOP EP case is used to package the op amp. OPERATIONAL AMPLIFIER-type instrumentation amplifiers are used in this application. The case in which buffer amplifier is delivered is called a Tape and Reel case. It is estimated that there will be 8 terminations in the next few months. There are a total of 8 pins on this op amp. It should be noted that this op amp is a type of Operational Amplifier device. There are 8 pins on this chip. In terms of the input offset voltage, instrumentation amplifier rates at 10mV. An 14mA volt supply current is needed for this linear amplifier to operate. There should be no change in the voltage gain. In order for op amp to function properly, the temperature should not be lower than -40°C degrees Celsius. Instrumentation amplifier should only be used at temperatures up to 85°C. There are a total of 2 elements in this linear amplifier. I would like to point out that this electrical component is capable of working from a voltage below 15V as far as the power supply is concerned. As a general rule, it is advisable to keep the op amp's supply voltage above 2.7V at all times. The dual supply voltage of 7.5V should be used for the conduct of this electronic component.

THS4222DGNRG4 Features

8 Pins
100dB voltage gain

THS4222DGNRG4 Applications

There are a lot of Texas Instruments
THS4222DGNRG4 Instrumentational OP Amps applications.

Addition operation circuits
Subtraction operation circuits
single/dual op amp sum and difference circuits
Integrator circuits
Differentiator circuits
Logarithmic operation circuits
Exponential operation circuits
Multiplication circuits
Division circuits
Precision measurement

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step4：Individual Package

Step5：Anti-collision Filling

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.