Microchip TC4422AVOA713
Microchip TC4422AVOA713

Microchip TC4422AVOA713

Manufacturer No:

TC4422AVOA713

Manufacturer:

Microchip

Package:

8-SOIC (0.154, 3.90mm Width)

Description:

9 A MOSFET Gate Driver

Delivery:

DHL
DHL
DHL
DHL

Payment:

DHL
DHL
DHL
DHL
DHL
DHL
DHL

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

TC4422AVOA713 information

Microchip TC4422AVOA713 technical specifications, attributes, parameters and parts with similar specifications to Microchip TC4422AVOA713.

  • Type
  • Parameter
  • MOSFET Driver Type
  • Low Side
  • Configuration
  • Non-Inverting
  • Maximum Supply Voltage (V)
  • 18
  • Peak Source Output (A)
  • 9
  • Peak Sink Output (A)
  • 9
  • Source Resistance (Ω)
  • 2
  • Sink Resistance (Ω)
  • 1.6
  • Propagation Delay t<sub>D1</sub> (ns)
  • 60
  • Propagation Delay t<sub>D2</sub> (ns)
  • 60
  • Rise Time (t<sub>R</sub>, ns)
  • 28
  • Fall Time (t<sub>F</sub>, ns)
  • 26
  • Capacitive Load Drive
  • 4,700 pF in 15 ns

The TC4421A/TC4422A are improved versions of the earlier TC4421/TC4422 family of single-output MOSFET gate drivers. These devices are high-current buffer/drivers capable of driving large MOSFETs and Insulated Gate Bipolar Transistors (IGBTs). The TC4421A/TC4422A have matched output rise and fall times, as well as matched leading and falling-edge propagation delay times. The TC4421A/TC4422A devices also have very low cross-conduction current, reducing the overall power dissipation of the device.


These devices are essentially immune to any form of upset, except direct overvoltage or over-dissipation. They cannot be latched under any conditions within their power and voltage ratings. These parts are not subject to damage or improper operation when up to 5 V of ground bounce is present on their ground terminals. They can accept, without damage or logic upset, more than 1 A inductive current of either polarity being forced back into their outputs. In addition, all terminals are fully protected against up to 4 kV of electrostatic discharge.


The TC4421A/TC4422A inputs may be driven directly from either TTL or CMOS (3 V to 18 V). In addition, 300 mV of hysteresis is built into the input, providing noise immunity and allowing the device to be driven from slowly rising or falling waveforms. With both surface-mount and pin-through-hole packages, in addition to a wide operating temperature range, the TC4421A/TC4422A family of 9 A MOSFET gate drivers fit into most any application where high gate/line capacitance drive is required.



  • Latch up Immunity
  • Matched Rise and Fall Times
  • Input withstands negative swings up to 5 V
  • High peak Output current of 9 A
  • High Capacitive Load drive Capability 10 nF in 25 ns
  • Wide Operating Range 4.5 V to 18 V
  • Low Propagation Delay Times < 50 ns
  • Low Output Impedance 800 mΩ
  • low supply current (450µA w/ logic 1 input)
  • Can Withstand Up to 1.5 A of Output Reverse Current
  • Reduced shoot through current
  • Wide Operating Temperature Range -55ºC to +125ºC
  • User Guide

    PURCHASE

    Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

    MEANS OF PAYMENT

    For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

    RFQ (REQUEST FOR QUOTATIONS)

    Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
    Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

    IMPORTANT NOTICE

    Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

    Step1:Prepare product

    Step1:Prepare product

    Step2:Desiccant Protection

    Step2:Desiccant Protection

    Step3:Vacuum Packaging

    Step3:Vacuum Packaging

    Step4:Individual Package

    Step4:Individual Package

    Step5:Anti-collision Filling

    Step5:Anti-collision Filling

    Step6:Packaging Box

    Step6:Packaging Box

    SHIPPING COST

    1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
    2. Some specific products need to reach the minimum order quantity.
    3. It may cost additional remote fees for delivery if you are in a remote area.

    SHIPPING METHOD

    Currently, our products are shipped through DHL, FedEx, SF, and UPS.

    DELIVERY TIME

    1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
    2. For in-stock parts, orders normally could be shipped out within 1-2days.