ST STM8L101F2P6

STM8L101F2P6                Description

  The STM8L101F2P6 low-power series features an enhanced STM8 CPU core that provides higher processing power (up to 16 MIPS at 16 MHz) while maintaining the advantages of a higher code density CISC architecture, 24-bit linear addressing space, and an optimized architecture for low-power operations. The series includes an integrated debugging module with a hardware interface (SWIM) that allows non-intrusive in-application debugging and ultra-fast flash memory programming. All STM8L101xx microcontrollers use low-power, low-voltage, single-power programming flash memory. The 8K byte device embeds data EEPROM. The STM8L101xx low power series is based on a set of state-of-the-art general-purpose peripherals. The modular design of the peripheral group allows the same peripherals to be found in different St microcontroller families, including the 32-bit series. This makes any transition to a different series easy and simplified by using a common set of development tools.

STM8L101F2P6                Features

? Main microcontroller features

– Supply voltage range 1.65 V to 3.6 V

– Low power consumption (Halt: 0.3 μA,

Active-halt: 0.8 μA, Dynamic Run:

150 μA/MHz)

– STM8 Core with up to 16 CISC MIPS

throughput

– Temp. range: -40 to 85 °C and 125 °C

? Memories

– Up to 8 Kbytes of Flash program including

up to 2 Kbytes of data EEPROM

– Error correction code (ECC)

– Flexible write and read protection modes

– In-application and in-circuit programming

– Data EEPROM capability

– 1.5 Kbytes of static RAM

? Clock management

– Internal 16 MHz RC with fast wakeup time

(typ. 4 μs)

– Internal low consumption 38 kHz RC

driving both the IWDG and the AWU

? Reset and supply management

– Ultra-low power POR/PDR

– Three low-power modes: Wait, Active-halt,

Halt

? Interrupt management

– Nested interrupt controller with software

priority control

– Up to 29 external interrupt sources

? I/Os

– Up to 30 I/Os, all mappable on external

interrupt vectors

– I/Os with programmable input pull-ups, high

sink/source capability and one LED driver

infrared output

 STM8L101F2P6               Applications

 This makes any transition to a different series easy and simplified by using a common set of development tools.