STMicroelectronics STM32U073MCT6

The STM32U073x8/B/C devices are ultra-low-power microcontrollers based on the high-performance Arm^® Cortex^®-M0+ 32-bit RISC core operating at a frequency of up to 56 MHz.

The STM32U073x8/B/C devices embed high-speed memories (up to 256-Kbyte flash memory and 40-Kbyte SRAM with hardware parity check), and an extensive range of enhanced I/Os and peripherals connected to APB and AHB buses, and a 32-bit multi-AHB bus matrix.

They also embed protection mechanisms for embedded flash memory and SRAM, such as readout protection and write protection.

The STM32U073x8/B/C devices offer a 12-bit ADC, a 12-bit DAC, two embedded rail-to-rail analog comparators, one operational amplifier, a low-power RTC, one general-purpose 32-bit timer, one 16-bit PWM timer dedicated to motor control, three general-purpose 16-bit timers, and three 16-bit low-power timers

The devices also embed up to 21 capacitive sensing channels, plus an integrated LCD controller that enables to drive 8x48 or 4x52 segments with internal step-up converter.

They also feature standard and advanced communication interfaces, namely four I2Cs, three SPIs, four USARTs and three low-power UARTs, plus one crystal-less USB full-speed device.

The STM32U073x8/B/C operate in the -40 to +85 °C (+105 °C junction) and -40 to +125 °C (+130 °C junction) temperature ranges from a 1.71 to 3.6 V VDD power supply using an internal LDO regulator. A comprehensive set of power-saving modes makes possible the design of low-power applications.

Independent power supplies are supported: analog independent supply input for ADC, DAC, OPAMP and comparator, as well as VBAT input allowing the backup of the RTC and backup registers.

The STM32U073x8/B/C offer eight packages from 32 to 81 pins.

• Includes ST state-of-the-art patented technology.
• Ultra-low-power features (ultra-low-power devices)
  • 1.71 V to 3.6 V power supply
  • -40 °C to 85/125 °C temperature range
  • VBAT mode: 130 nA (with RTC and 9 x 32-bit backup registers)
  • Shutdown mode (6 wake-up pins): 16 nA
  • Standby mode (6 wake-up pins): 160 nA with RTC, 30 nA without RTC
  • Stop 2 mode: 825 nA with RTC, 695 nA without RTC
  • Run mode (LDO mode): 52 μA/MHz
  • Batch acquisition mode (BAM)
  • 4 μs wake-up from Stop mode
  • Brownout reset (BOR)
• Core
  • 32-bit Arm^®
    Cortex^®-M0+ CPU, frequency up to 56 MHz
• ART Accelerator
  • 1-Kbyte instruction cache allowing 0-wait-state execution from flash memory
• Benchmarks
  • 1.13 DMIPS/MHz (Drystone 2.1)
  • 134 CoreMark^® (2.4 CoreMark/MHz at 56 MHz)
  • 407 ULPMark™-CP
  • 143 ULPMark™-PP
  • 19.7 ULPMark™-CM
• Memories
  • Up to 256-Kbyte single bank flash memory, proprietary code readout protection
  • 40-Kbyte SRAM with hardware parity check
• Rich analog peripherals (independent supply)
  • 1x 12-bit ADC (0.4 µs conversion time), up to 16-bit with hardware oversampling
  • 1x 12-bit DAC output channel, low-power sample and hold
  • 1x general-purpose operational amplifier with built-in PGA (variable gain up to 16)
  • 2x ultra-low-power comparators
• LCD driver
  • 8×48 or 4×52 segments, with step-up converter
• General-purpose inputs/outputs
  • Up to 69 fast I/Os, most of them 5 V‑tolerant
• 20 communication interfaces
  • USB 2.0 full-speed crystal-less solution with LPM and BCD
  • 7x USARTs/LPUARTs (SPI, ISO 7816, LIN, IrDA, modem)
  • 4x I2C interfaces supporting Fast-mode and Fast-mode Plus (up to 1 Mbit/s)
  • 3x SPIs, plus 4x USARTs in SPI mode
  • IRTIM (Infrared interface)
• Security
  • Customer code protection
  • 
    Robust read out protection (RDP): 3 protection level states and password-based regression (128-bit PSWD)
    
  • Hardware protection feature (HDP)
  • Secure boot
  • True random number generation, candidate for NIST SP 800-90B certification
  • Candidate for Arm^® PSA level 1 and SESIP level 3 certifications
  • 5 passive anti-tamper pins
  • 96-bit unique ID
• Clock management
  • 4 to 48 MHz crystal oscillator
  • 32 kHz crystal oscillator for RTC (LSE)
  • Internal 16 MHz factory-trimmed RC (±1%)
  • Internal low-power 32 kHz RC (±5%)
  • Internal multispeed 100 kHz to 48 MHz oscillator, auto-trimmed by LSE (better than ±0.25 % accuracy)
  • Internal 48 MHz with clock recovery
  • PLL for system clock, USB, ADC
• 10 timers, RTC, and 2 watchdogs
  • 1x 16-bit advanced motor-control, 1x 32-bit and 3x 16-bit general purpose, 2x 16-bit basic, 3x low-power 16-bit timers (available in Stop mode), 2x watchdogs, SysTick timer
  • RTC with hardware calendar, alarms and calibration
• CRC calculation unit
• Up to 21 capacitive sensing channels
  • Supporting touchkey, linear and rotary touch sensors
• 12-channel DMA controller
  • Flexible mapping (DMAMUX)
• Debug
  • Development support: serial wire debug (SWD)
• All packages are ECOPACK2 compliant.