ST STM32H745ZIT6U

STM32H745ZIT6U Description

STM32H745ZIT6U is a 32-Bit Microcontroller Nucleo-144 with Internal SMPS Function Development Board. The STM32H745ZIT6U has 12 general-purpose 16-bit timers, three ADCs, two DACs, two ultra-low-power comparators, a low-power RTC, a high-resolution timer, two PWM timers for motor control, five low-power timers, and a genuine random number generator (RNG). For external sigma-delta modulators, the STM32H745ZIT6U supports four digital filters (DFSDM). Standard and cutting-edge communication interfaces are also included.

STM32H745ZIT6U Features

Dual-core

32-bit Arm? Cortex?-M7 core with double-precision FPU and L1 cache: 16 Kbytes of data and 16 Kbytes of instruction cache; frequency up to 480 MHz, MPU, 1027 DMIPS/ 2.14 DMIPS/MHz (Dhrystone 2.1), and DSP instructions

32-bit Arm? 32-bit Cortex?-M4 core with FPU, Adaptive real-time accelerator (ART Accelerator?) for internal Flash memory and external memories, frequency up to 240 MHz, MPU, 300 DMIPS/1.25 DMIPS /MHz (Dhrystone 2.1), and DSP instructions

Memories

Up to 2 Mbytes of Flash memory with read-while-write support

1 Mbyte of RAM: 192 Kbytes of TCM RAM (inc. 64 Kbytes of ITCM RAM + 128 Kbytes of DTCM RAM for time critical routines), 864 Kbytes of user SRAM, and 4 Kbytes of SRAM in the Backup domain

Dual mode Quad-SPI memory interface running up to 133 MHz

Flexible external memory controller with up to 32-bit data bus: SRAM, PSRAM, SDRAM/LPSDR SDRAM, NOR/NAND Flash memory clocked up to 125 MHz in Synchronous mode

CRC calculation unit

Security

ROP, PC-ROP, active tamper

General-purpose input/outputs

Up to 168 I/O ports with interrupt capability

Reset and power management

3 separate power domains which can be independently clock-gated or switched off:

D1: high-performance capabilities

D2: communication peripherals and timers

D3: reset/clock control/power management

1.62 to 3.6 V application supply and I/Os

POR, PDR, PVD, and BOR

Dedicated USB power embedding a 3.3 V internal regulator to supply the internal PHYs

Embedded regulator (LDO) to supply the digital circuitry

High power-efficiency SMPS step-down converter regulator to directly supply VCORE and/or external circuitry

Voltage scaling in Run and Stop mode (6 configurable ranges)

Backup regulator (~0.9 V)

The voltage reference for analog peripheral/VREF+

1.2 to 3.6 V VBAT supply

Low-power modes: Sleep, Stop, Standby, and VBAT supporting battery charging

Low-power consumption

VBAT battery operating mode with charging capability

CPU and domain power state monitoring pins

2.95 μA in Standby mode (Backup SRAM OFF, RTC/LSE ON)

Clock management

Internal oscillators: 64 MHz HSI, 48 MHz HSI48, 4 MHz CSI, 32 kHz LSI

External oscillators: 4-48 MHz HSE, 32.768 kHz LSE

3× PLLs (1 for the system clock, 2 for kernel clocks) with Fractional mode

STM32H745ZIT6U Applications

• Multiple DIY Projects

• Very good choice if you are learning PIC

• Projects requiring Multiple I/O interfaces and communications

• Replacement for Arduino Module

• Ideal for more advanced level A/D applications in automotive, industrial, appliances, and consumer applications.