ST STM32F745ZET6

STM32F745ZET6                      Description

  STM32F745xx and STM32F746xx devices are based on a high-performance ARM Cortex - M7 32-bit RISC core and operate at up to 216 MHz. The Cortex - M7 kernel uses single floating point unit (SFPU) precision and supports all ARM single-precision data processing instructions and data types. It also implements a complete set of DSP instructions and a memory protection unit (MPU), thereby enhancing the security of the application. STM32F745xx and STM32F746xx devices integrate high-speed embedded memory with up to 1m bytes of flash memory, 320K bytes of SRAM (including 64K bytes of data Tcm RAM for critical real-time data), 16K bytes of instruction Tcm RAM (for critical real-time routines), and 4K bytes of backup SRAM (available in minimum power mode) And various enhanced I APB O and peripheral devices connected to two APB buses, two AHB buses, a 32-bit multi-AHB bus matrix and a multi-layer AXI interconnect that supports internal and external memory access.

STM32F745ZET6                Features

? Core: ARM? 32-bit Cortex?-M7 CPU with FPU,

adaptive real-time accelerator (ART

Accelerator?) and L1-cache: 4KB data cache

and 4KB instruction cache, allowing 0-wait

state execution from embedded Flash memory

and external memories, frequency up to

216 MHz, MPU, 462 DMIPS/2.14 DMIPS/MHz

(Dhrystone 2.1), and DSP instructions.

? Memories

? Up to 1MB of Flash memory

? 1024 bytes of OTP memory

? SRAM: 320KB (including 64KB of data TCM RAM for critical real-time data) +

16KB of instruction TCM RAM (for critical

real-time routines) + 4KB of backup SRAM

(available in the lowest power modes)

? Flexible external memory controller with up to 32-bit data bus: SRAM, PSRAM,

SDRAM/LPSDR SDRAM, NOR/NAND

memories

? Dual mode Quad-SPI

? LCD parallel interface, 8080/6800 modes

? LCD-TFT controller up to XGA resolution with

dedicated Chrom-ART Accelerator? for

enhanced graphic content creation (DMA2D)

? Clock, reset and supply management

? 1.7 V to 3.6 V application supply and I/Os

? POR, PDR, PVD and BOR

? Dedicated USB power

? 4-to-26 MHz crystal oscillator

? Internal 16 MHz factory-trimmed RC (1% accuracy)

? 32 kHz oscillator for RTC with calibration

? Internal 32 kHz RC with calibration

? Low-power

? Sleep, Stop and Standby modes

? VBAT supply for RTC, 32×32 bit backup

registers + 4KB backup SRAM

? 3×12-bit, 2.4 MSPS ADC: up to 24 channels

and 7.2 MSPS in triple interleaved mode

? 2×12-bit D/A converters

STM32F745ZET6                Applications

? Motor drive and application control,

? Medical equipment,

? Industrial applications: PLC, inverters, circuit breakers,

? Printers, and scanners,

? Alarm systems, video intercom, and HVAC,

? Home audio appliances,

? Mobile applications, Internet of Things,

? Wearable devices: smartwatches.