ST STM32F439BIT6J

STM32F439BIT6J                   Description

The STM32F437xx and STM32F439xx devices are based on the high-performance Arm? Cortex?-M4 32-bit RISC core operating at a frequency of up to 180 MHz. The Cortex-M4 core features a Floating point unit (FPU) single precision which supports all Arm? singleprecision data-processing instructions and data types. It also implements a full set of DSP instructions and a memory protection unit (MPU) which enhances application security. The STM32F437xx and STM32F439xx devices incorporate high-speed embedded memories (Flash memory up to 2 Mbyte, up to 256 Kbytes of SRAM), up to 4 Kbytes of backup SRAM, and an extensive range of enhanced I/Os and peripherals connected to two APB buses, two AHB buses and a 32-bit multi-AHB bus matrix.

STM32F439BIT6J                  Features

? Core: Arm? 32-bit Cortex?-M4 CPU with FPU,

Adaptive real-time accelerator (ART

Accelerator?) allowing 0-wait state execution

from Flash memory, frequency up to 180 MHz,

MPU, 225 DMIPS/1.25 DMIPS/MHz

(Dhrystone 2.1), and DSP instructions

? Memories

– Up to 2 MB of Flash memory organized into

two banks allowing read-while-write

– Up to 256+4 KB of SRAM including 64-KB

of CCM (core coupled memory) data RAM

– Flexible external memory controller with up

to 32-bit data bus: SRAM, PSRAM,

SDRAM/LPSDR SDRAM, Compact

Flash/NOR/NAND memories

? LCD parallel interface, 8080/6800 modes

? LCD-TFT controller with fully programmable

resolution (total width up to 4096 pixels, total

height up to 2048 lines and pixel clock up to

83 MHz)

? Chrom-ART Accelerator? for enhanced

graphic content creation (DMA2D)

? Clock, reset and supply management

– 1.7 V to 3.6 V application supply and I/Os

– POR, PDR, PVD and BOR

– 4-to-26 MHz crystal oscillator

– Internal 16 MHz factory-trimmed RC (1%

accuracy)

– 32 kHz oscillator for RTC with calibration

– Internal 32 kHz RC with calibration

? Low power

– Sleep, Stop and Standby modes

– VBAT supply for RTC, 20×32 bit backup

registers + optional 4 KB backup SRAM

? 3×12-bit, 2.4 MSPS ADC: up to 24 channels

and 7.2 MSPS in triple interleaved mode

? 2×12-bit D/A converters

? General-purpose DMA: 16-stream DMA

controller with FIFOs and burst support

? Up to 17 timers: up to twelve 16-bit and two 32-

bit timers up to 180 MHz, each with up to 4

IC/OC/PWM or pulse counter and quadrature

(incremental) encoder input

 STM32F439BIT6J                            Applications

? Motor drive and application control

? Medical equipment

? Industrial applications: PLC, inverters, circuit breakers

? Printers, and scanners

? Alarm systems, video intercom, and HVAC

? Home audio appliances