ST STM32F301K6T6

STM32F301K6T6 Description

The high-performance Arm? Cortex?-M4 32-bit RISC core of the STM32F301K6T6 series is based on a frequency of up to 72 MHz and incorporates a floating point unit. The series has numerous upgraded I/Os and peripherals coupled to two APB buses, high-speed embedded memories (up to 64 Kbytes of Flash memory and 16 Kbytes of SRAM), and two APB buses.

In addition to a quick 12-bit ADC (5 Msps), three comparators, an operational amplifier, up to 18 capacitive sensing channels, one DAC channel, a low-power RTC, one general-purpose 32-bit timer, one timer for motor control, up to three general-purpose 16-bit timers, and one timer to drive the DAC, the devices offer a fast 12-bit ADC. Additionally, they have multiplexed full-duplex I2S, three I2Cs, up to three USARTs, up to two SPIs, and an infrared transmitter in addition to regular and advanced communication interfaces.

With a power supply ranging from 2.0 to 3.6 V, the STM32F301K6T6 family can operate in temperature ranges of -40 to +85°C and -40 to +105°C. The development of low-power applications is made possible by a wide range of power-saving modes.

Devices from the STM32F301K6T6 family are available in packages with 32, 48, 49, and 64 pins.

Depending on the device selected, a different set of peripherals are included.

STM32F301K6T6 Features

• Up to 18 capacitive sensing channels supporting touchkey, linear and rotary sensors

• Up to 9 timers

– One 32-bit timer with up to 4 IC/OC/PWM or pulse counter and quadrature (incremental) encoder input

– One 16-bit 6-channel advanced-control timer, with up to 6 PWM channels, deadtime generation and emergency stop

– Three 16-bit timers with IC/OC/OCN or PWM, deadtime gen. and emergency stop

– One 16-bit basic timer to drive the DAC

– 2 watchdog timers (independent, window)

– SysTick timer: 24-bit downcounter

• Calendar RTC with alarm, periodic wakeup from Stop/Standby

• Communication interfaces

– Three I2Cs with 20 mA current sink to support Fast mode plus

– Up to 3 USARTs, 1 with ISO 7816 I/F, auto baudrate detect and Dual clock domain

– Up to two SPIs with multiplexed full duplex I2S

– Infrared transmitter

• Serial wire debug (SWD), JTAG

• 96-bit unique ID

• Core: Arm? 32-bit Cortex?-M4 CPU with FPU (72 MHz max.), single-cycle multiplication and HW division, DSP instruction

• Memories

– 32 to 64 Kbytes of Flash memory

– 16 Kbytes of SRAM on data bus

• CRC calculation unit

• Reset and power management

– VDD, VDDA voltage range: 2.0 to 3.6 V

– Power-on/Power down reset (POR/PDR)

– Programmable voltage detector (PVD)

– Low-power: Sleep, Stop, and Standby

– VBAT supply for RTC and backup registers

• Clock management

– 4 to 32 MHz crystal oscillator

– 32 kHz oscillator for RTC with calibration

– Internal 8 MHz RC with x 16 PLL option

– Internal 40 kHz oscillator

• Up to 51 fast I/O ports, all mappable on external interrupt vectors, several 5 V-tolerant

• Interconnect matrix

• 7-channel DMA controller supporting timers, ADCs, SPIs, I2Cs, USARTs and DAC

• 1 × ADC 0.20 μs (up to 15 channels) with selectable resolution of 12/10/8/6 bits, 0 to 3.6 V conversion range, single ended/differential mode, separate analog supply from 2.0 to 3.6 V

• Temperature sensor

• 1 x 12-bit DAC channel with analog supply from 2.4 to 3.6 V

• Three fast rail-to-rail analog comparators with analog supply from 2.0 to 3.6 V

• 1 x operational amplifier that can be used in PGA mode, all terminal accessible with analog supply from 2.4 to 3.6 V

STM32F301K6T6 Applications

• Radar

• Wristwatches

• Computers

• Video processor

• Televisions

• Logic devices

• Memory devices