ST STM32F101C4T6A

STM32F101C4T6A Description

The STM32F101C4T6A Low-density access line family includes the high-performance ARM Cortex?-M3 32-bit RISC core operating at a frequency of 36 MHz, high-speed embedded memories (Flash memory of 16 to 32 Kbytes and SRAM of 4 to 6 Kbytes), and a wide variety of enhanced peripherals and I/Os connected to two APB buses. Each device provides two USARTs, one I2C, one SPI, one 12-bit ADC, and up to two general-purpose 16-bit timers as standard communication interfaces.

The STM32F101C4T6A Low-density access line family runs between a power supply of 2.0 and 3.6 V and a temperature range of -40 to +85 °C. The development of low-power applications is made possible by a wide range of power-saving modes.

Devices in three different packages, with pin counts varying from 36 to 64, are part of the STM32F101C4T6A Low-density access line family. Different sets of peripherals are included depending on the device selected; the description that follows provides an overview of the whole spectrum of peripherals that are suggested for this family.

STM32F101C4T6A Features

• Up to 5 timers

– Up to two16-bit timers, each with up to 4 IC/OC/PWM or pulse counter

– 2 watchdog timers (Independent and Window)

– SysTick timer: 24-bit downcounter

• Up to 4 communication interfaces

– 1 x I2C interface (SMBus/PMBus)

– Up to 2 USARTs (ISO 7816 interface, LIN, IrDA capability, modem control)

– 1 × SPI (18 Mbit/s)

• CRC calculation unit, 96-bit unique ID

• ECOPACK? packages

• Low power

– Sleep, Stop and Standby modes

– VBAT supply for RTC and backup registers

• Debug mode

– Serial wire debug (SWD) and JTAG interfaces

• DMA

– 7-channel DMA controller

– Peripherals supported: timers, ADC, SPIs, I2Cs and USARTs

• 1 × 12-bit, 1 μs A/D converter (up to 16 channels)

– Conversion range: 0 to 3.6 V

– Temperature sensor

• Up to 51 fast I/O ports

– 26/37/51 I/Os, all mappable on 16 external interrupt vectors and almost all 5 V-tolerant

• Core: ARM? 32-bit Cortex?-M3 CPU

– 36 MHz maximum frequency, 1.25 DMIPS/MHz (Dhrystone 2.1) performance at 0 wait state memory access

– Single-cycle multiplication and hardware division

• Memories

– 16 to 32 Kbytes of Flash memory

– 4 to 6 Kbytes of SRAM

• Clock, reset and supply management

– 2.0 to 3.6 V application supply and I/Os

– POR, PDR and programmable voltage detector (PVD)

– 4-to-16 MHz crystal oscillator

– Internal 8 MHz factory-trimmed RC

– Internal 40 kHz RC

– PLL for CPU clock

– 32 kHz oscillator for RTC with calibration

STM32F101C4T6A Applications

• Application control

• User interface

• Medical and handheld equipment

• PC peripherals, gaming and GPS platforms

• Industrial applications

• PLCs

• Inverters

• Printers

• Scanners

• Alarm systems

• Video intercoms

• HVACs