TI SN75LBC784DWR

Manufacturer No:

SN75LBC784DWR

Manufacturer:

Package:

28-SOIC (0.295, 7.50mm Width)

Description:

28 Terminations 28 Pin 75LBC784 Receivers 4 Bits 4/4 Drivers/Receivers 4 Functions

Quantity:

Delivery:

Payment:

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

SN75LBC784DWR information

TI SN75LBC784DWR technical specifications, attributes, parameters and parts with similar specifications to TI SN75LBC784DWR.

Type
Parameter

Mount
Surface Mount

Mounting Type
Surface Mount

Package / Case
28-SOIC (0.295, 7.50mm Width)

Number of Pins
28

Operating Temperature
0°C~70°C

Packaging
Cut Tape (CT)

Pbfree Code
no

Part Status
Obsolete

Moisture Sensitivity Level (MSL)
1 (Unlimited)

Number of Terminations
28

ECCN Code
EAR99

Type
Transceiver

HTS Code
8542.39.00.01

Technology
BICMOS

Voltage - Supply
10.8V~13.2V

Terminal Position
DUAL

Terminal Form
GULL WING

Peak Reflow Temperature (Cel)
NOT SPECIFIED

Number of Functions
4

Supply Voltage
12V

Terminal Pitch
1.27mm

Reach Compliance Code
unknown

Time@Peak Reflow Temperature-Max (s)
NOT SPECIFIED

Base Part Number
75LBC784

Qualification Status
Not Qualified

Power Supplies
+-12V

Supply Current-Max
12mA

Logic Function
Receiver

Data Rate
120 kbps

Output Characteristics
TOTEM-POLE

Differential Output
NO

Output Polarity
INVERTED

Protocol
RS423

Input Characteristics
DIFFERENTIAL SCHMITT TRIGGER

Number of Drivers/Receivers
4/4

Driver Number of Bits
4

Receiver Number of Bits
4

Duplex
Full

Receiver Hysteresis
40mV

Interface Standard
EIA-232; EIA-423-B

Receive Delay-Max
1000 ns

Negative Supply Voltage-Nom
-12V

Transmit Delay-Max
2700 ns

Output Low Current-Max
0.004A

Out Swing-Min
8 V

High Level Input Current-Max
0.0001A

Length
17.9mm

Download datasheets and manufacturer documentation for TI SN75LBC784DWR.

Datasheets:

texasinstruments-sn75lbc784dwr-datasheets-7571.pdf

texasinstruments-sn75lbc784dwr-datasheets-8025.pdf

texasinstruments-sn75lbc784dwr-datasheets-8026.pdf

SN75LBC784DWR Overview

This LED driver IC features an enhanced 28-SOIC (0.295, 7.50mm Width) package for driving common LEDs.The receiver is packaged in a Cut Tape (CT) package.As a Transceiver can transceiver, this part has enabled many applications to be served.This wide receiver can be placed on any Surface Mount-type PCB or development board.This differential driver uses 10.8V~13.2V for power supply.There can be up to 4/4 eligible receivers/drivers on the field at the same time with this electronic part.IC receiver has been designed primarily for applications operating at 0°C~70°C.With a supply voltage range of 12V, this line driver ic operates efficiently.28 terminations are integrated into this wide receiver for driving and receiving signals from data.It is packaged with 28 pinouts that are market standard for this particular transceiver.The base part number 75LBC784 identifies the product type, temperature, package, etc., so you can search for more variants by using it.A 28-pin driver IC with enhanced power dissipation control is featured here.Through optical transceiver downsizing and high-density Surface Mount mounting technologies, its package size is reduced dramatically.Using this ic receiver, you were able to achieve a resolution of 4 bits.It is typical for this receiver to have a resolution of 4 bits when it is specified.The driver IC in this product is designed so that it can be powered by +-12V.The VCC pin of the ic receiver should receive enough but not more than 12mA of input current.It is recommended that the line driver ic's operating temperature be kept above -12V.

SN75LBC784DWR Features

Cut Tape (CT) package
28 pin count
28 pins
+-12V power supply

SN75LBC784DWR Applications

There are a lot of Texas Instruments
SN75LBC784DWR Drivers/Receivers/Transceivers applications.

Cell phones
Wireless modems
Remote controls
Wireless network systems
Satellite communications networks
Ethernet circuitry
Wired telephone
Cordless telephone
Desktop PC
Notebook

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step4：Individual Package

Step5：Anti-collision Filling

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.