TI SN74LVC574ANSRE4

Manufacturer No:

SN74LVC574ANSRE4

Manufacturer:

Package:

SOP

Description:

8 Bit Flip Flop DUAL 20 Pins SOP

Quantity:

Delivery:

Payment:

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

SN74LVC574ANSRE4 information

TI SN74LVC574ANSRE4 technical specifications, attributes, parameters and parts with similar specifications to TI SN74LVC574ANSRE4.

Type
Parameter

Mount
Surface Mount

Package / Case
SOP

Number of Pins
20

Weight
266.712314mg

Packaging
Tape & Reel (TR)

JESD-609 Code
e4

Moisture Sensitivity Level (MSL)
1 (Unlimited)

Number of Terminations
20

Terminal Finish
Nickel/Palladium/Gold (Ni/Pd/Au)

Max Operating Temperature
125°C

Min Operating Temperature
-40°C

Subcategory
FF/Latches

Packing Method
TAPE AND REEL

Technology
CMOS

Terminal Position
DUAL

Terminal Form
GULL WING

Peak Reflow Temperature (Cel)
260

Number of Functions
1

Supply Voltage
1.8V

Frequency
150MHz

Time@Peak Reflow Temperature-Max (s)
NOT SPECIFIED

Pin Count
20

Qualification Status
Not Qualified

Polarity
Non-Inverting

Number of Circuits
8

Max Supply Voltage
3.6V

Min Supply Voltage
1.65V

Load Capacitance
50pF

Number of Ports
2

Current - Output
24mA

Number of Bits
8

Propagation Delay
7.8 ns

Turn On Delay Time
7 ns

Family
LVC/LCX/Z

Logic Function
D-Type, Flip-Flop

Logic IC Type
BUS DRIVER

Max I(ol)
0.024 A

High Level Output Current
-24mA

Low Level Output Current
24mA

Number of Input Lines
3

Number of Output Lines
1

Clock Edge Trigger Type
Positive Edge

Height Seated (Max)
2mm

RoHS Status
RoHS Compliant

Lead Free
Lead Free

Download datasheets and manufacturer documentation for TI SN74LVC574ANSRE4.

SN74LVC574ANSRE4 Overview

It is packaged in the way of SOP. D flip flop is embedded in the Tape & Reel (TR) package. There are 20 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. It is powered from a supply voltage of 1.8V. This D flip flop belongs to the family of LVC/LCX/Z. This electronic part is mounted in the way of Surface Mount. It is designed with 20 pins. Edge triggering is a type of triggering that allows a circuit to become active at the positive edge or the negative edge of the clock signal. The clock edge trigger type of this device is Positive Edge. This part is included in FF/Latches. This flip flop is designed with 8 Bits. 8 circuits are used to achieve its superior flexibility. This D flip flop is well suited for TAPE AND REEL based on its reliable performance. There are 2 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. There are 1 output Lines, which generate the binary equivalent of the input line whose value is equal to ?1? and are available to encode either a decimal or hexadecimal input pattern to typically a binary or ?B. C. D? (binary coded decimal) output code. There are 3 input Lines, which consist of an electronic circuit connected between the ac mains and the rectifier input stage of the switching power supply. The high level output current is set to -24mA. The low level output current is set to 24mA. The operating temperature should be lower than 125°C. The operating temperature should be higher than -40°C. It operates with the minimal supply voltage of 1.65V. It supports the maximal supply voltage of 3.6V. The frequency that can be achieved is 150MHz. The logic IC it adopts is BUS DRIVER. It is equipped with 1 Functions . It is equipped with 20 pin count. The output current of 24mA makes it feature maximum design flexibility.

SN74LVC574ANSRE4 Features

Tape & Reel (TR) package
20 pins
8 Bits
1 Functions
20 pin count

SN74LVC574ANSRE4 Applications

There are a lot of Texas Instruments
SN74LVC574ANSRE4 Flip Flops applications.

Digital electronics systems
Computers
Communications
Counters
Frequency Dividers
Shift Registers
Storage Registers
Bounce elimination switch
Data storage
Data transfer

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step4：Individual Package

Step5：Anti-collision Filling

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.