SN74LVC2G80DCURE4-TI-Price, Stock & Datasheet

SN74LVC2G80DCURE4 Overview

8-VFSOP (0.091, 2.30mm Width)is the packaging method. The Tape & Reel (TR)package contains it. T flip flop is configured with an output of Inverted. This trigger is configured to use Positive Edge. In this case, the electronic component is mounted in the way of Surface Mount. The JK flip flop operates with an input voltage of 1.65V~5.5V volts. In the operating environment, the temperature is -40°C~125°C TA. It is an electronic flip flop with the type D-Type. This type of FPGA is a part of the 74LVC series. This D flip flop should not have a frequency greater than 160MHz. There is 5?A quiescent consumption. A total of 8terminations have been recorded. The 74LVC2G80 family contains it. A voltage of 1.8V provides power to the D latch. This T flip flop has a capacitance of 3.5pF farads at the input. It belongs to the family of electronic devices known as LVC/LCX/Z. There is an electronic part that is mounted in the way of Surface Mount. The 8pins are designed into the board. This device exhibits a clock edge trigger type of Positive Edge. There is a FF/Latchesbase part number assigned to the RS flip flops. As soon as Vsup reaches 5.5V, the maximum supply voltage is reached. The superior flexibility of this circuit is achieved by using 2 circuits. Considering its reliability, this T flip flop is well suited for TAPE AND REEL. A total of 3.3V power supplies are needed to run it. In order for the chip to function, it has 1output lines.