TI SN74HC374PWT

Manufacturer No:

SN74HC374PWT

Manufacturer:

Package:

20-TSSOP (0.173, 4.40mm Width)

Description:

2V~6V 70MHz 8 Bit D-Type Flip Flop DUAL 74HC374 20 Pins 8?A 74HC Series 20-TSSOP (0.173, 4.40mm Width)

Quantity:

Delivery:

Payment:

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

SN74HC374PWT information

TI SN74HC374PWT technical specifications, attributes, parameters and parts with similar specifications to TI SN74HC374PWT.

Type
Parameter

Lifecycle Status
ACTIVE (Last Updated: 1 week ago)

Factory Lead Time
6 Weeks

Mount
Surface Mount

Mounting Type
Surface Mount

Package / Case
20-TSSOP (0.173, 4.40mm Width)

Number of Pins
20

Weight
76.997305mg

Operating Temperature
-40°C~85°C TA

Packaging
Tape & Reel (TR)

Series
74HC

JESD-609 Code
e4

Pbfree Code
yes

Part Status
Active

Moisture Sensitivity Level (MSL)
1 (Unlimited)

Number of Terminations
20

Termination
SMD/SMT

Type
D-Type

Terminal Finish
Nickel/Palladium/Gold (Ni/Pd/Au)

Subcategory
FF/Latches

Packing Method
TR

Technology
CMOS

Voltage - Supply
2V~6V

Terminal Position
DUAL

Terminal Form
GULL WING

Supply Voltage
5V

Terminal Pitch
0.65mm

Time@Peak Reflow Temperature-Max (s)
NOT SPECIFIED

Base Part Number
74HC374

Function
Standard

Qualification Status
Not Qualified

Output Type
Tri-State, Non-Inverted

Operating Supply Voltage
5V

Number of Elements
1

Polarity
Non-Inverting

Supply Voltage-Max (Vsup)
6V

Power Supplies
2/6V

Supply Voltage-Min (Vsup)
2V

Number of Circuits
8

Load Capacitance
50pF

Number of Ports
2

Output Current
7.8mA

Number of Bits
8

Clock Frequency
70MHz

Propagation Delay
230 ns

Turn On Delay Time
15 ns

Family
HC/UH

Logic Function
D-Type, Flip-Flop

Download datasheets and manufacturer documentation for TI SN74HC374PWT.

Datasheets:

texasinstruments-sn74hc374pwt-datasheets-4002.pdf

texasinstruments-sn74hc374pwt-datasheets-4003.pdf

texasinstruments-sn74hc374pwt-datasheets-4004.pdf

texasinstruments-sn74hc374pwt-datasheets-4005.pdf

SN74HC374PWT Overview

As a result, it is packaged as 20-TSSOP (0.173, 4.40mm Width). The package Tape & Reel (TR)contains it. Currently, the output is configured to use Tri-State, Non-Inverted. It is configured with a trigger that uses Positive Edge. The electronic part is mounted in the way of Surface Mount. A voltage of 2V~6Vis used as the supply voltage. -40°C~85°C TAis the operating temperature. This D latch has the type D-Type. It belongs to the 74HCseries of FPGAs. There should be no greater frequency than 70MHzon its output. There are 1 elements in it. As a result, it consumes 8?A of quiescent current without being affected by external factors. In 20terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. This D latch belongs to the family of 74HC374. The power supply voltage is 5V. Its input capacitance is 3pF farads. It is a member of the HC/UHfamily of D flip flop. In this case, the electronic component is mounted in the way of Surface Mount. The electronic flip flop is designed with pins 20. Its clock edge trigger type is Positive Edge. The part is included in FF/Latches. The flip flop is designed with 8bits. 6Vis the maximum supply voltage (Vsup). Normally, the supply voltage (Vsup) should be kept above 2V. The superior flexibility of this product is achieved by using 8 circuits. As a result of its reliability, this D flip flop is ideally suited for TR. There are 2/6V power supplies attached to it. There are 2 ports embedded in the flip flops. A high level of efficiency can be achieved by maintaining the supply voltage at 5V. Its output current of 7.8mAallows for maximum design flexibility. It is reported that there are 3 input lines.

SN74HC374PWT Features

Tape & Reel (TR) package
74HC series
20 pins
8 Bits
2/6V power supplies

SN74HC374PWT Applications

There are a lot of Texas Instruments
SN74HC374PWT Flip Flops applications.

Computers
Communications
Counters
Frequency Dividers
Shift Registers
Storage Registers
Bounce elimination switch
Data storage
Data transfer
Latch

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step4：Individual Package

Step5：Anti-collision Filling

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.