SN74CBTS6800DBQR-TI-Price, Stock & Datasheet

SN74CBTS6800DBQR Overview

Due to the fact that it is provided in the 24-SSOP (0.154, 3.90mm Width), digital switch allows the board to be compacted.As a result, it is packaged in a way that is referred to as Tape & Reel (TR).digital switch ic uses the method of Surface Mount for mounting.The multiplexers uses an analog IC Bus Switch as the analog part of the circuit.The operating temperature of -40°C~85°C will not be susceptible to external factors.Designers have greater flexibility when digital controlled switch operates at a 4.5V~5.5V supply voltage.In addition to being a member of the 74CBTS series, these multiplexers have a wide range of applications.It is designed with 24 terminations as part of its basic configuration.As its base part number is 74CBTS6800, logic switch can also be used to find its related parts.For multiplexer's system, a voltage of 5V is supplied.This turn signal switch consists of 24 component pins.Using the point GULL WING as an end point of conductors, it is used to determine the terminus of a conductor.In this case, the supply type is Single.A configuration of 24 pins is used.The mounting point is Surface Mount.I would like to refer to the logic switch as a member of the CBT/FST/QS/5C/B family.As a result, signal multiplexer provides a total of 10 bits.To prevent unnecessary failures, it is recommended that the minimum supply voltage (Vsup) remain at 4V.During mux switch's normal operation, 5V is provided with a power supply.This is an the digital switch ic that is classified as Bus Driver/Transceivers.With a supply voltage of 5V, reliable performance of the multiplexers can be achieved.A resistance of 2 is used to operate the signal switching.The resistance of the signal switching is 7Ohm.It is possible to provide a current output of 64mA for greater switches' flexibility.