SN74AVC16269DGGR-TI-Price, Stock & Datasheet

SN74AVC16269DGGR Overview

The package 56-TFSOP (0.240, 6.10mm Width) contains this file embedded in it. I have packaged it in a way that is similar to Cut Tape (CT)'s. A 12 ~ 24-Bit circuit is used for achieving its superior flexibility as a result of its use of 12 ~ 24-Bit circuits. As far as the logic type of this electrical device is concerned, it is Registered Bus Exchanger. I have mounted this electronic part in the way of Surface Mount in this way. It is recommended that the operating temperature be higher than -40°C~85°C. In addition, 12mA 12mA features the highest level of flexibility in its design due to its high and low output currents. An FPGA belonging to the 74AVC series is a type of FPGA. There is a supply voltage of 1.4V~3.6V that it operates on. 74AVC16269 family is the family in which it belongs. It is possible to use 56 terminations, which are the ends of a transmission line which should be connected to a device whose characteristic impedance matches that of the transmission line. For normal operation, the supply voltage must be kept above 1.5V in order for the device to function properly. In addition, it is equipped with a 56 pin count. In order to design this electronic part, 12 Bits have been used. There are a number of termination types, including 3 terminations, which is the term that refers to the practice of terminating a transmission line with a device that matches the characteristic impedance of the line. In this case, the electronic part is mounted in the direction of Surface Mount. 56 pins are used in the design of this board. The electronic device in question belongs to the AVC family of electronic devices. Upon reaching 3.6V, the maximum supply voltage (Vsup) is reached. A 3.3V power supply is used to operate it. In this case, it is made up of 1 elements. As a result of the output current 12mA, this device offers maximum design flexibility. There is a part included in Other Logic ICs that is similar to this one. It is in this case that 40?A of quiescent current is consumed without being affected by external factors in any way. As you can see, it is configured with 24 outputs. As part of the switching power supply, there is a line called the 12 input line, which consists of an electronic circuit that is connected between the ac mains and the rectifier input stage of the switching power supply.