TI SN74ALS574BDWRE4

Manufacturer No:

SN74ALS574BDWRE4

Manufacturer:

Package:

SOIC

Description:

8 Bit Flip Flop DUAL 20 Pins SOIC

Quantity:

Delivery:

Payment:

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

SN74ALS574BDWRE4 information

TI SN74ALS574BDWRE4 technical specifications, attributes, parameters and parts with similar specifications to TI SN74ALS574BDWRE4.

Type
Parameter

Mount
Surface Mount

Package / Case
SOIC

Number of Pins
20

Weight
500.709277mg

Packaging
Tape and Reel

JESD-609 Code
e4

Moisture Sensitivity Level (MSL)
1 (Unlimited)

Number of Terminations
20

ECCN Code
EAR99

Terminal Finish
Nickel/Palladium/Gold (Ni/Pd/Au)

Max Operating Temperature
70°C

Min Operating Temperature
0°C

Subcategory
FF/Latches

Technology
TTL

Terminal Position
DUAL

Terminal Form
GULL WING

Peak Reflow Temperature (Cel)
260

Number of Functions
1

Supply Voltage
5V

Frequency
35MHz

Time@Peak Reflow Temperature-Max (s)
NOT SPECIFIED

Pin Count
20

Qualification Status
Not Qualified

Output Type
TTL

Polarity
Non-Inverting

Power Supplies
5V

Temperature Grade
COMMERCIAL

Number of Circuits
8

Max Supply Voltage
5.5V

Min Supply Voltage
4.5V

Load Capacitance
50pF

Number of Ports
2

Current - Output
24mA

Number of Bits
8

Propagation Delay
14 ns

Turn On Delay Time
3 ns

Family
ALS

Logic Function
D-Type, Flip-Flop

Logic IC Type
BUS DRIVER

Max I(ol)
0.024 A

High Level Output Current
-2.6mA

Low Level Output Current
24mA

Power Supply Current-Max (ICC)
27mA

Number of Input Lines
3

Number of Output Lines
1

Clock Edge Trigger Type
Positive Edge

Height Seated (Max)
2.65mm

Download datasheets and manufacturer documentation for TI SN74ALS574BDWRE4.

SN74ALS574BDWRE4 Overview

As a result, it is packaged as SOIC. The package Tape and Reelcontains it. Currently, the output is configured to use TTL. In 20terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. The power supply voltage is 5V. It is a member of the ALSfamily of D flip flop. In this case, the electronic component is mounted in the way of Surface Mount. The electronic flip flop is designed with pins 20. Its clock edge trigger type is Positive Edge. The part is included in FF/Latches. The flip flop is designed with 8bits. The superior flexibility of this product is achieved by using 8 circuits. There are 5V power supplies attached to it. There are 2 ports embedded in the flip flops. A high level of efficiency can be achieved by maintaining the supply voltage at 5V. It is designed with 1 output lines. It is reported that there are 3 input lines. High level output current is set to -2.6mA. Low level output current is set to 24mA. A temperature below 70°Cshould be used for operation. Ideally, the operating temperature should be greater than 0°C. The minimal supply voltage is 4.5V. The maximum supply voltage supported by the flip flop is 5.5V. It is possible to achieve a frequency of 35MHz. It adopts a logic IC of type BUS DRIVER. The T flip flop is equipped with 1functions . The JK flip flop has a pin count of 20. 24mA provides maximum design flexibility due to its output current.

SN74ALS574BDWRE4 Features

Tape and Reel package
20 pins
8 Bits
5V power supplies
1 Functions
20 pin count

SN74ALS574BDWRE4 Applications

There are a lot of Texas Instruments
SN74ALS574BDWRE4 Flip Flops applications.

Computers
Communications
Counters
Frequency Dividers
Shift Registers
Storage Registers
Bounce elimination switch
Data storage
Data transfer
Latch

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step4：Individual Package

Step5：Anti-collision Filling

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.