SC1102CSTRT-SEMTECH-Price, Stock & Datasheet

SC1102CSTRT Overview

As a result of 14-SOIC (0.154, 3.90mm Width) compact design, the switching controller is compatible with most applications. 1 outputs are supported by the dc motor controller. An enclosure of Tape & Reel (TR) is used to package the PMIC. The system can process Transistor Driver dc switching's outputs (s). 4.2V~12.6V is the supply voltage and the operating voltage of the dc control. Workable in an dc switcher where 0°C~70°C TA is the 0°C~70°C TArm. dc dc regulator can be generalized using Surface Mount. Switching control is made easier with the dcdc regulator's Enable, Phase Control, Soft Start. Connected to a SWITCHING CONTROLLER analog IC, the switch converters are connected to a power supply. switching converters terminal (s) are designed to be at DUAL. There are many different types of terminations for 14. Some of the control techniques used by these dc dc converter ics are PULSE WIDTH MODULATION. It is inputted with a DC switcher's voltage of 4.75V. A search for "SC1102" will reveal other relevant dc to dc converter ics. 14 pins are present on switching converter. The type is a particular Switching Regulator or Controllers of switching converter. Input voltage of dc dc voltage regulator must be 4.2V. It's important to remember that the dc dc regulator's normaloutput current is 1A, so you should note it down when starting a new project. The maximum duty cycle of this voltage regulator dc to dc is set to 95 % to ensure reliability during power-up and power-down. As DC switcher has a Surface Mount, it's suitable for most applications and prototype designs. Switching controller operates at 200kHz Hz.