Microchip PIC32MZ0512EFK100-I/PT

The PIC32MZ EF Family offers a high-performance MCU running up to 252 MHz with up to 2 MB Flash and 512 KB SRAM targeting connectivity applications in Industrial, automotive, IOT , Graphics(HMI) and Motor Control Market Segments. 

PIC32MZ EF family has best-in-class peripheral set including I2 S/SPI; 8-/16-bit Parallel Master Port (PMP) and External Bus Interface (EBI); 48-channel, 12-bit Analog-to-Digital Converter (ADC); Hi-Speed USB 2.0-compliant Device/ Host/OTG; 10/100 Mbps Ethernet MAC; Serial Quad Interface (SQI) and Crypto Engine for encryption/decryption.

These devices are fully supported by the MPLAB^® Harmony integrated software framework and AECQ-100 Grade1 (125C) qualified.                                  

• 200 MHz/330 DMIPS, MIPS M-class core
• Four 64-bit accumulators
• Single-cycle MAC, saturating and fractional math
• IEEE 754-compliant
• Dual Panel Flash for live update support
• FPU for fast single
• and double-precision math
• 12-bit, 18 MSPS, 40-channel ADC module
• Memory Management Unit for optimum embedded OS execution
• microMIPS mode for up to 35% code compression
• CAN, UART, I2C, PMP, EBI, SQI & Analog Comparators
• SPI/I2S interfaces for audio processing and playback
• Hi-Speed USB 2.0 Device/Host/OTG
• 10/100 Mbps Ethernet MAC with MII and RMII interface
• Crypto Engine with a RNG for data encryption/decryption and authentication (AES, 3DES, SHA, MD5, and HMAC)
• Temperature Range: 
• 40°C to 85°C; 
• 40°C to 125°C
• Grade 1
• 40°C to 125°C
• Operating voltage range of 2.2V to 3.6V
• 512KB Flash memory (plus an additional 160 KB of Boot Flash)
• 128KB SRAM memory
• microMIPS mode for up to 35% smaller code size
• Four 64-bit accumulators
• Single-cylce MAC, saturating and fractional math
• IEEE 754-compliant
• FPU for fast single
• and double-precision math
• Code-efficient (C and Assembly) architecture
• Low-power management modes (Idle and Sleep)
• 50 MHz External Bus Interface (EBI)
• 50 MHz Serial Quad Interface (SQI)
• Peripheral Pin Select (PPS) functionality to enable function remap
• 8 channels of hardware programmable DMA and 18 channels of dedicated DMA with automatic data size detection
• Six UART modules (25 Mbps): Supports LIN 1.2 and IrDA protocols
• Two CAN modules 2.0B Active with DeviceNet addressing support
• Six 4-wire SPI modules (50 Mbps)
• SQI configurable as an additional SPI module (50 MHz)
• Five I2C modules (up to 1 Mbaud) with SMBus support
• Parallel Master Port (PMP)
• Hardware Real-Time Clock and Calendar (RTCC)
• Nine 16-bit Timers/Counters (four 16-bit pairs combine to create four 32-bit timers)
• Nine Capture inputs and Nine Compare/PWM outputs
• Graphics interface: EBI or PMP
• Audio data communication: I2S, LJ, RJ, USB
• Audio data control interface: SPI and I2C™
• Audio data master clock: Fractional clock frequencies with USB synchronization
• 18 Msps rate with six Sample and Hold (S&H) circuits (five dedicated and one shared)
• Up to 40 analog inputs
• Can operate during sleep and idle modes
• Multiple trigger sources
• Six digital comparators and six digital filters
• Two analog comparators with 32 programmable voltage references
• Temperature sensor with ±2°C accuracy
• In-circuit and in-application programming
• 4-wire MIPS® Enhanced JTAG interface
• Unlimited program and 12 complex data breakpoints
• IEEE 1149.2-compatible (JTAG) boundary scan
• Non-intrusive hardware-based instruction trace
• MPLAB Harmony
•  PIC32 software development framework
• C/C++ compiler with native DSP/fractional and FPU support
• TCP/IP, USB, Graphics and mTouch middleware
• MFi, Android and Bluetooth audio frameworks
• RTOS Kernels, Express Logic, ThreadX, FreeRTOS, OPENRTOS, Micriµm, µC/OS and SEGGER embOS