Microchip PIC24FJ128GA202-I/SS
Microchip PIC24FJ128GA202-I/SS

Microchip PIC24FJ128GA202-I/SS

Manufacturer No:

PIC24FJ128GA202-I/SS

Manufacturer:

Microchip

Package:

28-SSOP (0.209, 5.30mm Width)

Description:

The PIC24F GA2 is a low power microcontroller with integrated crypto engine, key storage and random number generator, designed for applications that need to protect user data while conserving power and extending battery life

Delivery:

DHL
DHL
DHL
DHL

Payment:

DHL
DHL
DHL
DHL
DHL
DHL
DHL

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

PIC24FJ128GA202-I/SS information

Microchip PIC24FJ128GA202-I/SS technical specifications, attributes, parameters and parts with similar specifications to Microchip PIC24FJ128GA202-I/SS.

  • Type
  • Parameter
  • CPU Type
  • 16-bit PIC MCU
  • CPU Speed Max MHz (megahertz)
  • 16
  • Program Memory Size (KB)
  • 128
  • Multiple Flash Panels
  • False
  • Direct Memory Access (DMA) Channels
  • 6
  • Temp. Range Min.(C°)
  • -40
  • Temp. Range Max.(C°)
  • 85
  • Operation Voltage Min.(V)
  • 2
  • Operation Voltage Max.(V)
  • 3.6
  • Pin Count
  • 28
  • Low Power
  • Yes
  • Number of Comparators
  • 3
  • ADC Modules
  • 1
  • ADC Channels
  • 9
  • ADC Resolution Max
  • 12
  • ADC Sampling Rate (ksps)
  • 500
  • Number of DACs
  • 0
  • DAC outputs
  • 0
  • Max DAC Resolution (bits)
  • 0
  • Hardware RTCC
  • Yes
  • Motor Control PWM Channels
  • 0
  • SMPS PWM Channels
  • 0
  • Number of PWM Time Bases
  • 1
  • Output Compare Channels
  • 6
  • Number of CAN Modules
  • 0
  • Type of CAN module Max
  • None
  • Crypto Engine
  • Yes
  • Quadrature Encoder Interface (QEI)
  • 0
  • Segment LCD
  • 0
  • LCD/Graphics Interface
  • No
  • Configurable Logic Cell Modules (CLC /CCL)
  • 0
  • Peripheral Pin Select (PPS)/Pin Muxing
  • Yes
  • Supported in MPLAB Code Configurator
  • Yes

Download datasheets and manufacturer documentation for Microchip PIC24FJ128GA202-I/SS.

Programming Specifications:

Legacy Collaterals:

Reference Manual:

Data Sheets:

Brochures:

Application Notes:

Supporting Collateral:

Errata:

16-bit microcontroller featuring an integrated crypto module and eXtreme Low Power. This device includes 128KB Flash, 8KB RAM and other advanced peripherals. The combination of features makes the part ideally suited for low power embedded security applications.

    Cryptographic Engine
  • AES Engine with 128,192 or 256-Bit Key
  • Supports ECB, CBC, OFB, CTR and CFB128 modes
  • DES/Triple DES (TDES) Engine: Supports 2-Key and 3-Key EDE or DED TDES
  • Supports up to Three Unique Keys for TDES
  • Programmatically Secure
  • True Random Number Generator
  • Pseudorandom Number Generator
  • Non-Readable, On-Chip, OTP Key Storages
    Extreme Low-Power
  • Extreme Low-Power Current Consumption: WDT: 270 nA @ 3.3V typical, RTCC: 400 nA @ 32 kHz, 3.3V typical, Deep Sleep current, 40 nA, 3.3V typical
  • Multiple Power Management Options: VBAT, Deep Sleep, Sleep and Idle Mode, Doze Mode.
  • Alternate Clock modes allow On-the-Fly Switching to a Lower Clock Speed for Selective Power Reduction
    CPU
  • Supply Voltage Range of 2.0V to 3.6V
  • Up to 16 MIPS Operation @ 32 MHz
  • 17-Bit x 17-Bit Single-Cycle Hardware Fractional/Integer Multiplier
  • 32-Bit by 16-Bit Hardware Divider
  • 16 x 16-Bit Working Register Array
  • C Compiler Optimized Instruction Set Architecture (ISA)
  • Two Address Generation Units (AGUs) for Separate Read and Write Addressing of Data Memory
    Analog Features
  • 10/12-Bit, 12-Ch ADC: Conversion rate of 500 ksps (10-bit), 200 ksps (12-bit)
  • ADC Conversion available during Sleep and Idle
  • Three Rail-to-Rail, Enhanced Analog Comparators with Programmable Input/Output Configuration
  • Three On-Chip Programmable Voltage References
  • Charge Time Measurement Unit (CTMU): Used for capacitive touch sensing or precise time measurement
    Additional Peripherals
  • Peripheral Pin Select (PPS); Allows Independent I/O Mapping of many Peripherals
  • Five 16-Bit Timers/Counters with Pre-scaler
  • Six-Channel DMA supports All Peripheral modules
  • Six Input Capture modules, each with a Dedicated 16-Bit Timer
  • Six Output Compare/PWM modules, each with a Dedicated 16-Bit Timer
  • Hardware Real-Time Clock/Calendar (RTCC)
  • Three SPI modules including I2S mode
  • Two I2C™ modules Support Multi-Master/Slave mode and 7-Bit/10-Bit Addressing
  • Programmable 32-Bit Cyclic Redundancy Check (CRC) Generator
  • Four UART modules, supporting RS-485, RS-232, LIN/J2602, and On-chip hardware encoder/decoder for IrDA®

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step1：Prepare product

Step2：Desiccant Protection

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step3：Vacuum Packaging

Step4：Individual Package

Step4：Individual Package

Step5：Anti-collision Filling

Step5：Anti-collision Filling

Step6：Packaging Box

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.

PIC24FJ128GA202-I/SS Relevant information

The following parts are popular search parts in Integrated Circuits (ICs).