PI3B34X245BEX-DIODES-Price, Stock & Datasheet

PI3B34X245BEX Overview

Due to the fact that it is provided in the 80-FSOP (0.154, 3.90mm Width), digital switch allows the board to be compacted.As a result, it is packaged in a way that is referred to as Tape & Reel (TR).digital switch ic uses the method of Surface Mount for mounting.The multiplexers uses an analog IC Bus Switch as the analog part of the circuit.The operating temperature of -40°C~85°C will not be susceptible to external factors.Designers have greater flexibility when digital controlled switch operates at a 3V~3.6V supply voltage.It is designed with 80 terminations as part of its basic configuration.For multiplexer's system, a voltage of 3.3V is supplied.Using the point GULL WING as an end point of conductors, it is used to determine the terminus of a conductor.In this case, the supply type is Single.A configuration of 80 pins is used.The mounting point is Surface Mount.I would like to refer to the logic switch as a member of the CBTLV/3B family.As a result, signal multiplexer provides a total of 32 bits.To prevent unnecessary failures, it is recommended that the minimum supply voltage (Vsup) remain at 2.97V.In order to avoid unnecessary failures, the maximum supply voltage (Vsup) should be kept at 3.63V.This is an the digital switch ic that is classified as Bus Driver/Transceivers.Without external influences, it consumes 10?A current of multiplexer ic.With a supply voltage of 3.3V, reliable performance of the multiplexers can be achieved.A resistance of 2 is used to operate the signal switching.The resistance of the signal switching is 17Ohm.