PI3B32X245BE-DIODES-Price, Stock & Datasheet

PI3B32X245BE Overview

Due to the fact that it is provided in the 40-FSOP (0.154, 3.90mm Width), digital switch allows the board to be compacted.As a result, it is packaged in a way that is referred to as Tube.digital switch ic uses the method of Surface Mount for mounting.The multiplexers uses an analog IC Bus Switch as the analog part of the circuit.The operating temperature of -40°C~85°C will not be susceptible to external factors.Designers have greater flexibility when digital controlled switch operates at a 3V~3.6V supply voltage.It is designed with 40 terminations as part of its basic configuration.As its base part number is 32X245, logic switch can also be used to find its related parts.For multiplexer's system, a voltage of 3.3V is supplied.Using the point GULL WING as an end point of conductors, it is used to determine the terminus of a conductor.In this case, the supply type is Single.A configuration of 40 pins is used.The mounting point is Surface Mount.I would like to refer to the logic switch as a member of the CBTLV/3B family.As a result, signal multiplexer provides a total of 16 bits.In order to avoid unnecessary failures, the maximum supply voltage (Vsup) should be kept at 3.63V.This is an the digital switch ic that is classified as Bus Driver/Transceivers.Without external influences, it consumes 3?A current of multiplexer ic.With a supply voltage of 3.3V, reliable performance of the multiplexers can be achieved.A resistance of 2 is used to operate the signal switching.The resistance of the signal switching is 10Ohm.