ONSEMI PACVGA105QR

Manufacturer No:

PACVGA105QR

Manufacturer:

ONSEMI

Package:

16-SSOP (0.154, 3.90mm Width)

Description:

ESD Protection Diodes, VGA Port Companion Circuit

Quantity:

Delivery:

Payment:

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

PACVGA105QR information

ONSEMI PACVGA105QR technical specifications, attributes, parameters and parts with similar specifications to ONSEMI PACVGA105QR.

Type
Parameter

Container Type
REEL

Container Qty.
2500

Direction
Unidirectional

Case Outline
492-01

VRWM Max (V)
5.5

C Max (pF)
10

V(BR) Min (V)
1.7

IR Max (µA)
10

MSL Type
1

MSL Temp (°C)
260

Interface
VGA

Number of Lines
7

Package Type
QSOP-16

PPK Max (W)
0.75

Download datasheets and manufacturer documentation for ONSEMI PACVGA105QR.

Datasheet:

850ad8b4bbcb6d9862969a54c6253a15.pdf

Package Drawing:

7c0a944190a11614cd50ffacd9ce62c8.pdf

The PACVGA105 incorporates 7 channels of ESD protection for signal lines commonly found in a VGA port for PCs. ESD protection is implemented with current steering diodes designed to safely handle the high peak surge currents associated with the IEC-61000-4-2 Level-4 ESD Protection Standard (±8kV contact discharge). When the channels are subjected to an electrostatic discharge, the ESD current pulse is diverted via the protection diodes into the positive supply rails or ground where they may be safely dissipated. The upper ESD diodes for the R, G and B channels are connected to a separate supply rail (VRGB) to facilitate interfacing to graphics controller ICs with low voltage supplies. The remaining channels are connected to the main 5V rail (VCC). The lower diodes for the R, G and B channels are also connected to a dedicated ground pin (GNDA) to minimize crosstalk due to common ground impedance. Two non-inverting buffers are also included in this IC for buffering the HSYNC and VSYNC signals from the graphics controller IC. These buffers will accept TTL input levels and convert them to CMOS output levels that swing between GND and VCC. These drivers have a nominal 60Ω output impedance to match the characteristic impedance of the HSYNC and VSYNC lines of the video cables typically used. The inputs of these drivers also have high impedance pull-ups (50kW nom.) pulling up to the VAUX rail. In addition, the DDC_CLOCK and DDC_DATA channels have 1.8kΩ resistors pulling these inputs up to the main 5V (VCC) rail.

Application

ESD protection and termination resistors for VGA (video) port interfaces

End Product

Digital TV, Set Top Box, PC/Notebook, Gaming

Feature

Seven channels of ESD protection designed to meet IEC-61000-4-2 Level-4 ESD requirements (±8kV contact discharge)
Very low loading capacitance from ESD protection diodes at less than 5pF typical
TTL to CMOS level-translating buffers for the HSYNC and VSYNC lines
Three independent supply pins (V_CC, V_RGB and V_AUX) to facilitate operation with sub-micron Graphics Controller ICs
High impedance pull-ups (50kΩ nominal to VAUX) for HSYNC and VSYNC inputs
Pull-up resistors (1.8kΩ nominal to VCC) for DDC_CLK and DDC_DATA lines

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step4：Individual Package

Step5：Anti-collision Filling

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.