CIRRUS LOGIC PA162DK

Manufacturer No:

PA162DK

Manufacturer:

CIRRUS LOGIC

Package:

Description:

4 Channels 1.5A per Channel 100nA 60 dB Instrumentational OP Amps 0.5μA 30V 20 Pins

Quantity:

Delivery:

Payment:

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

PA162DK information

CIRRUS LOGIC PA162DK technical specifications, attributes, parameters and parts with similar specifications to CIRRUS LOGIC PA162DK.

Type
Parameter

Mount
Surface Mount

Number of Pins
20

JESD-609 Code
e3

Pbfree Code
yes

Part Status
Active

Number of Terminations
20

ECCN Code
EAR99

Terminal Finish
Matte Tin (Sn)

Max Operating Temperature
125°C

Min Operating Temperature
-40°C

Subcategory
Operational Amplifier

Technology
BIPOLAR

Terminal Position
DUAL

Terminal Form
GULL WING

Peak Reflow Temperature (Cel)
260

Number of Functions
1

Supply Voltage
30V

Terminal Pitch
1.27mm

Time@Peak Reflow Temperature-Max (s)
40

Pin Count
20

Operating Supply Voltage
30V

Temperature Grade
AUTOMOTIVE

Number of Channels
4

Max Supply Voltage
40V

Operating Supply Current
16mA

Supply Current-Max
80mA

Slew Rate
1.4 V/μs

Architecture
VOLTAGE-FEEDBACK

Amplifier Type
OPERATIONAL AMPLIFIER

Common Mode Rejection Ratio
60 dB

Current - Input Bias
100nA

Output Current per Channel
1.5A

Input Offset Voltage (Vos)
1mV

Bandwidth
1.1MHz

Gain Bandwidth Product
900 kHz

Neg Supply Voltage-Nom (Vsup)
-15V

Unity Gain BW-Nom
900 kHz

Voltage Gain
100dB

Average Bias Current-Max (IIB)
0.5μA

Low-Offset
NO

Frequency Compensation
YES

Max Dual Supply Voltage
20V

Min Dual Supply Voltage
2.5V

Bias Current-Max (IIB) @25C
0.5μA

Power
YES

Length
15.9mm

Radiation Hardening
No

Download datasheets and manufacturer documentation for CIRRUS LOGIC PA162DK.

Datasheets:

cirruslogic-pa162dk-datasheets-5839.pdf

PA162DK Overview

Buffer amps of this type are called OPERATIONAL AMPLIFIER-types. The number of terminations is approaching the 20 mark. The total number of pins on linear amplifier is 20. The linear amplifier should be run at 30V at all times, so please keep that in mind when using it. In order to be more specific, this instrumentation amplifier is one of the types of Operational Amplifier devices. 20 pins are included on the operational amplifiers. As far as the input offset voltage is concerned, linear amplifier rates at 1mV. It is possible to operate this buffer amplifier from a supply current of 16mA . 100dB should be the voltage gain. Op amp ic has 4 channels. In order for this buffer op amp to function, it should have a temperature of at least -40°C degrees Celsius. At temperatures greater than 125°C, Instrumentation amplifier should not be used. The operating supply voltage of the buffer op amp is rated at 30V. The electrical part is capable of being powered by a voltage of under 40V, which means that it can be used with any voltage supply. As a rule of thumb, the supply voltage of the op amp should not be lower than 5V. As a general rule, you should conduct this electronic component under dual supply voltages of 20V volts.

PA162DK Features

20 Pins
supply voltage of 30V
100dB voltage gain

PA162DK Applications

There are a lot of Cirrus Logic
PA162DK Instrumentational OP Amps applications.

Subtraction operation circuits
single/dual op amp sum and difference circuits
Integrator circuits
Differentiator circuits
Logarithmic operation circuits
Exponential operation circuits
Multiplication circuits
Division circuits
Precision measurement
Power control

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step4：Individual Package

Step5：Anti-collision Filling

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.