TI OPA4243EA/250

Manufacturer No:

OPA4243EA/250

Manufacturer:

Package:

14-TSSOP (0.173, 4.40mm Width)

Description:

10nA 82 dB Instrumentational OP Amps 0.025?A 18V 2.2V~36V ±1.1V~18V OPA4243 14 Pins 14-TSSOP (0.173, 4.40mm Width)

Quantity:

Delivery:

Payment:

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

OPA4243EA/250 information

TI OPA4243EA/250 technical specifications, attributes, parameters and parts with similar specifications to TI OPA4243EA/250.

Type
Parameter

Lifecycle Status
ACTIVE (Last Updated: 6 days ago)

Factory Lead Time
6 Weeks

Mounting Type
Surface Mount

Package / Case
14-TSSOP (0.173, 4.40mm Width)

Surface Mount
YES

Number of Pins
14

Operating Temperature
-40°C~85°C

Packaging
Cut Tape (CT)

JESD-609 Code
e4

Pbfree Code
yes

Part Status
Active

Moisture Sensitivity Level (MSL)
3 (168 Hours)

Number of Terminations
14

ECCN Code
EAR99

Terminal Finish
Nickel/Palladium/Gold (Ni/Pd/Au)

Subcategory
Operational Amplifier

Packing Method
TR

Technology
BIPOLAR

Terminal Position
DUAL

Terminal Form
GULL WING

Peak Reflow Temperature (Cel)
260

Number of Functions
4

Supply Voltage
7.5V

Base Part Number
OPA4243

Operating Supply Voltage
18V

Number of Elements
4

Power Supplies
+-1.1/+-18/2.2/36V

Nominal Supply Current
240?A

Current - Supply
45?A

Slew Rate
0.16V/?s

Architecture
VOLTAGE-FEEDBACK

Amplifier Type
General Purpose

Common Mode Rejection Ratio
82 dB

Current - Input Bias
10nA

Voltage - Supply, Single/Dual (±)
2.2V~36V ±1.1V~18V

Input Offset Voltage (Vos)
5mV

Bandwidth
430 kHz

Neg Supply Voltage-Nom (Vsup)
-7.5V

Unity Gain BW-Nom
430 kHz

Voltage Gain
104dB

Average Bias Current-Max (IIB)
0.025?A

Power Supply Rejection Ratio (PSRR)
112.04dB

Low-Offset
NO

Frequency Compensation
YES

Voltage - Input Offset
2mV

Current - Output / Channel
25mA

Low-Bias
NO

Download datasheets and manufacturer documentation for TI OPA4243EA/250.

OPA4243EA/250 Overview

Packaging for the buffer amplifier is in the form of a 14-TSSOP (0.173, 4.40mm Width) case. A General Purpose-type buffer amplifier is shown here. There is a Cut Tape (CT) case that is delivered with the instrumentation amplifiers. A total of 14 terminations have been reported in the past few weeks. Buffer amplifier has a total of 14 pins on it. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 7.5V. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. An 14-pin op amp ic is included in the package. With regards to the offset voltage of the input, buffer amplifier is rated at 5mV. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. The buffer amplifier functions well at -40°C~85°C as far as operating temperature is concerned. 104dB should be the voltage gain. There is an operating supply voltage rating of 4 for this operational amplifier, which is rated at the manufacturer. The operating supply voltage of the buffer op amp is rated at 18V. A TR-shaped amplifier is used to pack the buffer amps. A supply of 45?A or higher is recommended for use with this electronic part.

OPA4243EA/250 Features

14 Pins
supply voltage of 7.5V
104dB voltage gain

OPA4243EA/250 Applications

There are a lot of Texas Instruments
OPA4243EA/250 Instrumentational OP Amps applications.

single/dual op amp sum and difference circuits
Integrator circuits
Differentiator circuits
Logarithmic operation circuits
Exponential operation circuits
Multiplication circuits
Division circuits
Precision measurement
Power control
Information processing

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step4：Individual Package

Step5：Anti-collision Filling

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.