TI OPA337PAG4

Manufacturer No:

OPA337PAG4

Manufacturer:

Package:

8-DIP (0.300, 7.62mm)

Description:

9mA per Channel 0.2pA 74 dB Instrumentational OP Amps 2.7V~5.5V ±1.35V~2.75V OPA337 8 Pins 8-DIP (0.300, 7.62mm)

Quantity:

Delivery:

Payment:

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

OPA337PAG4 information

TI OPA337PAG4 technical specifications, attributes, parameters and parts with similar specifications to TI OPA337PAG4.

Type
Parameter

Mounting Type
Through Hole

Package / Case
8-DIP (0.300, 7.62mm)

Surface Mount
NO

Number of Pins
8

Operating Temperature
-40°C~85°C

Packaging
Tube

Series
MicroAmplifier?

JESD-609 Code
e4

Part Status
Obsolete

Moisture Sensitivity Level (MSL)
1 (Unlimited)

Number of Terminations
8

ECCN Code
EAR99

Terminal Finish
Nickel/Palladium/Gold (Ni/Pd/Au)

Subcategory
Operational Amplifier

Technology
CMOS

Terminal Position
DUAL

Number of Functions
1

Supply Voltage
5V

Terminal Pitch
2.54mm

Base Part Number
OPA337

Pin Count
8

Output Type
Rail-to-Rail

Number of Elements
1

Power Supplies
3/5V

Nominal Supply Current
1mA

Slew Rate
1.2V/?s

Architecture
VOLTAGE-FEEDBACK

Amplifier Type
General Purpose

Common Mode Rejection Ratio
74 dB

Current - Input Bias
0.2pA

Voltage - Supply, Single/Dual (±)
2.7V~5.5V ±1.35V~2.75V

Output Current per Channel
9mA

Input Offset Voltage (Vos)
3mV

Bandwidth
3MHz

Unity Gain BW-Nom
3000 kHz

Voltage Gain
120dB

Power Supply Rejection Ratio (PSRR)
92.04dB

Low-Offset
NO

Frequency Compensation
YES

Supply Voltage Limit-Max
7.5V

Voltage - Input Offset
500?V

Low-Bias
YES

Micropower
NO

Programmable Power
NO

Nominal Gain Bandwidth Product
3MHz

Max I/O Voltage
3mV

Height
4.57mm

Download datasheets and manufacturer documentation for TI OPA337PAG4.

OPA337PAG4 Overview

In order to protect the op amps, a 8-DIP (0.300, 7.62mm) case is used. There are two types of operational amplifiers in this circuit. In the case of Tube cases, linear amplifier will be delivered. In recent months, the number of terminations has approached 8. It consists of a total of 8 pins in total. It would be helpful if you could remember that this op amp ic should be powered by an 5V battery. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. It has 8 pins that make up the linear amplifier. In terms of input offset voltage, operational amplifier rates 3mV. This electronic component is recommended to be mounted using the mounting type Through Hole. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~85°C for optimal performance. In order for this instrumentation amplifier to operate, the supply current needs to be between 525?A and 10 . Maintain 120dB as the voltage gain. As one of the many benefits of this buffer amplifier, it puts out Rail-to-Rail signals, which is one of the many benefits it offers. As a whole, there are 1 elements that make up this buffer amplifier. MicroAmplifier? is the number that corresponds to the series of the buffer op amp.

OPA337PAG4 Features

8 Pins
supply voltage of 5V
120dB voltage gain
Output Type: Rail-to-Rail

OPA337PAG4 Applications

There are a lot of Texas Instruments
OPA337PAG4 Instrumentational OP Amps applications.

Differentiator circuits
Logarithmic operation circuits
Exponential operation circuits
Multiplication circuits
Division circuits
Precision measurement
Power control
Information processing
Weak signal detection
Signal amplification

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step4：Individual Package

Step5：Anti-collision Filling

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.