TI OPA335AIDRG4

Manufacturer No:

OPA335AIDRG4

Manufacturer:

Package:

SOIC

Description:

50mA per Channel 200pA 110 dB Instrumentational OP Amps 0.0002?A 2.75V 8 Pins SOIC

Quantity:

Delivery:

Payment:

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

OPA335AIDRG4 information

TI OPA335AIDRG4 technical specifications, attributes, parameters and parts with similar specifications to TI OPA335AIDRG4.

Type
Parameter

Package / Case
SOIC

Surface Mount
YES

Number of Pins
8

Packaging
Tape and Reel

JESD-609 Code
e4

Moisture Sensitivity Level (MSL)
2 (1 Year)

Number of Terminations
8

ECCN Code
EAR99

Terminal Finish
Nickel/Palladium/Gold (Ni/Pd/Au)

Max Operating Temperature
125°C

Min Operating Temperature
-40°C

Subcategory
Operational Amplifier

Technology
CMOS

Terminal Position
DUAL

Terminal Form
GULL WING

Peak Reflow Temperature (Cel)
260

Number of Functions
1

Supply Voltage
5V

Pin Count
8

Operating Supply Voltage
2.75V

Number of Elements
1

Temperature Grade
AUTOMOTIVE

Max Supply Voltage
5.5V

Min Supply Voltage
2.7V

Nominal Supply Current
350?A

Slew Rate
1.6 V/?s

Architecture
CHOPPER-STAB

Amplifier Type
OPERATIONAL AMPLIFIER

Common Mode Rejection Ratio
110 dB

Current - Input Bias
200pA

Output Current per Channel
50mA

Input Offset Voltage (Vos)
5?V

Bandwidth
2MHz

Gain Bandwidth Product
2MHz

Unity Gain BW-Nom
2000 kHz

Voltage Gain
130dB

Average Bias Current-Max (IIB)
0.0002?A

Power Supply Rejection Ratio (PSRR)
120dB

Low-Offset
YES

Frequency Compensation
YES

Max Dual Supply Voltage
2.75V

Low-Bias
YES

Micropower
YES

Min Dual Supply Voltage
1.35V

Bias Current-Max (IIB) @25C
0.0002?A

Max I/O Voltage
5?V

Length
4.9mm

Download datasheets and manufacturer documentation for TI OPA335AIDRG4.

OPA335AIDRG4 Overview

It is packaged in an SOIC-case that protects the operational amplifiers from damage. An op amp of this type is a OPERATIONAL AMPLIFIER-type. As far as the packaging is concerned, buffer op amp is delivered in a Tape and Reel case. It is estimated that there will be at least 8 terminations this year. A total of 8 pins are attached to buffer op amp. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. In total, the buffer amplifier consists of 8 pins. Op amp ic rates 5?V for input offset voltage. A supply current of 285?A can be used to operate this linear amplifier. There should be no change in the voltage gain at 130dB. This instrumentation amplifier cannot operate below -40°C degrees Celsius. You should only use op amp buffer at temperatures that are no higher than 125°C. There are 1 elements in this buffer amplifier. The operating supply voltage of the buffer op amp is rated at 2.75V. It is important to keep in mind that the power supply voltage of this electric component is below 5.5V, which is suitable. Keeping the linear amplifier's supply voltage above 2.7V is recommended. In order to conduct this part, you will need to provide dual supply voltages of 2.75V volts.

OPA335AIDRG4 Features

8 Pins
supply voltage of 5V
130dB voltage gain

OPA335AIDRG4 Applications

There are a lot of Texas Instruments
OPA335AIDRG4 Instrumentational OP Amps applications.

Logarithmic operation circuits
Exponential operation circuits
Multiplication circuits
Division circuits
Precision measurement
Power control
Information processing
Weak signal detection
Signal amplification
Signal filtering

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step4：Individual Package

Step5：Anti-collision Filling

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.