TI OPA301AIDBVTG4

Manufacturer No:

OPA301AIDBVTG4

Manufacturer:

Package:

SOT-23

Description:

70mA per Channel 5pA 66 dB Instrumentational OP Amps 5 Pins SOT-23

Quantity:

Delivery:

Payment:

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

OPA301AIDBVTG4 information

TI OPA301AIDBVTG4 technical specifications, attributes, parameters and parts with similar specifications to TI OPA301AIDBVTG4.

Type
Parameter

Package / Case
SOT-23

Surface Mount
YES

Number of Pins
5

Weight
17.491656mg

Packaging
Tape and Reel

JESD-609 Code
e4

Moisture Sensitivity Level (MSL)
2 (1 Year)

Number of Terminations
5

ECCN Code
EAR99

Terminal Finish
Nickel/Palladium/Gold (Ni/Pd/Au)

Max Operating Temperature
125°C

Min Operating Temperature
-40°C

Subcategory
Operational Amplifier

Technology
CMOS

Terminal Position
DUAL

Terminal Form
GULL WING

Peak Reflow Temperature (Cel)
260

Number of Functions
1

Supply Voltage
5V

Pin Count
5

Temperature Grade
AUTOMOTIVE

Number of Circuits
1

Max Supply Voltage
5.5V

Min Supply Voltage
2.7V

Slew Rate
80 V/μs

Architecture
VOLTAGE-FEEDBACK

Amplifier Type
OPERATIONAL AMPLIFIER

Common Mode Rejection Ratio
66 dB

Current - Input Bias
5pA

Output Current per Channel
70mA

Input Offset Voltage (Vos)
5mV

Bandwidth
150MHz

Gain Bandwidth Product
150MHz

Unity Gain BW-Nom
150000 kHz

Voltage Gain
106dB

Power Supply Rejection Ratio (PSRR)
86.02dB

Low-Offset
NO

Frequency Compensation
YES

Max Dual Supply Voltage
2.75V

Low-Bias
YES

Micropower
NO

Min Dual Supply Voltage
1.35V

Programmable Power
NO

Nominal Gain Bandwidth Product
150MHz

Max I/O Voltage
5mV

Height
1.15mm

Length
2.9mm

Download datasheets and manufacturer documentation for TI OPA301AIDBVTG4.

OPA301AIDBVTG4 Overview

In the package, you will find a SOT-23-case to contain the op amp ic. The instrumentation amplifier in this picture is of the OPERATIONAL AMPLIFIER-type. A Tape and Reel case is used for delivering the op amp. During the past two weeks, there have been close to 5 terminations. A total of 5 pins are located on this board. This linear amplifier should be powered by an 5V battery. This particular linear amplifier is a type of Operational Amplifier device, to be precise. The op amp ic has an array of 5 pins on it. Op amp rates 5mV as input offset voltage. Using an 9.5mA supply current, this operational amplifier ics can be operated. You should keep the voltage gain at 106dB for the time being. A instrumentation amplifier like this has 1 circuits. To operate this buffer amplifier, the temperature must not be lower than -40°C. A temperature greater than 125°C should not be used for the operation of buffer amplifier. This electric component can work from a voltage of under 5.5V as far as supply voltage is concerned. A voltage of 2.7V or higher is recommended for the linear amplifier's supply voltage. This electrical part should be conducted under the dual supply voltage of 2.75V volts when you conduct this part.

OPA301AIDBVTG4 Features

5 Pins
supply voltage of 5V
106dB voltage gain

OPA301AIDBVTG4 Applications

There are a lot of Texas Instruments
OPA301AIDBVTG4 Instrumentational OP Amps applications.

Multiplication circuits
Division circuits
Precision measurement
Power control
Information processing
Weak signal detection
Signal amplification
Signal filtering
Signal operation
Video computer boards

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step4：Individual Package

Step5：Anti-collision Filling

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.