TI OPA2334AIDGSRG4

Manufacturer No:

OPA2334AIDGSRG4

Manufacturer:

Package:

MSOP

Description:

50mA per Channel 200pA 110 dB Instrumentational OP Amps 2.75V 10 Pins MSOP

Quantity:

Delivery:

Payment:

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

OPA2334AIDGSRG4 information

TI OPA2334AIDGSRG4 technical specifications, attributes, parameters and parts with similar specifications to TI OPA2334AIDGSRG4.

Type
Parameter

Package / Case
MSOP

Surface Mount
YES

Number of Pins
10

Packaging
Tape & Reel (TR)

Pbfree Code
yes

Moisture Sensitivity Level (MSL)
2 (1 Year)

Number of Terminations
10

ECCN Code
EAR99

Max Operating Temperature
125°C

Min Operating Temperature
-40°C

Subcategory
Operational Amplifier

Packing Method
TAPE AND REEL

Technology
CMOS

Terminal Position
DUAL

Terminal Form
GULL WING

Peak Reflow Temperature (Cel)
260

Number of Functions
2

Supply Voltage
5V

Terminal Pitch
0.5mm

Pin Count
10

Operating Supply Voltage
2.75V

Number of Elements
2

Power Supplies
3/5V

Temperature Grade
AUTOMOTIVE

Min Supply Voltage
2.7V

Operating Supply Current
570μA

Nominal Supply Current
700μA

Slew Rate
1.6 V/μs

Architecture
CHOPPER-STAB

Amplifier Type
OPERATIONAL AMPLIFIER

Common Mode Rejection Ratio
110 dB

Current - Input Bias
200pA

Output Current per Channel
50mA

Input Offset Voltage (Vos)
5μV

Bandwidth
2MHz

Gain Bandwidth Product
2MHz

Unity Gain BW-Nom
2000 kHz

Voltage Gain
130dB

Power Supply Rejection Ratio (PSRR)
120dB

Low-Offset
YES

Frequency Compensation
YES

Max Dual Supply Voltage
2.75V

Low-Bias
YES

Micropower
YES

Min Dual Supply Voltage
1.35V

Programmable Power
NO

Max I/O Voltage
5μV

Download datasheets and manufacturer documentation for TI OPA2334AIDGSRG4.

OPA2334AIDGSRG4 Overview

In order to protect the op amps, a MSOP case is used. There are two types of operational amplifiers in this circuit. In the case of Tape & Reel (TR) cases, linear amplifier will be delivered. In recent months, the number of terminations has approached 10. It consists of a total of 10 pins in total. It would be helpful if you could remember that this op amp ic should be powered by an 5V battery. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. It has 10 pins that make up the linear amplifier. In terms of input offset voltage, operational amplifier rates 5μV. In order for this instrumentation amplifier to operate, the supply current needs to be between 570μA and 10 . Maintain 130dB as the voltage gain. It is recommended that the temperature of this op amp ic should not fall below -40°C degrees Fahrenheit at any time. Linear amplifier shouldn't be used above 125°C degrees. As a whole, there are 2 elements that make up this buffer amplifier. The operating supply voltage of the buffer op amp is rated at 2.75V. As a result of this, the buffer amplifier is packed in TAPE AND REEL. When it comes to the voltage from which this electrical part will operate, it can operate at a maximum of less than 5.5V. It is recommended that you keep the instrumentation amplifier's supply voltage higher than 2.7V when using it. It is recommended that you conduct this electronic part using the dual supply voltage of 2.75V.

OPA2334AIDGSRG4 Features

10 Pins
supply voltage of 5V
130dB voltage gain

OPA2334AIDGSRG4 Applications

There are a lot of Texas Instruments
OPA2334AIDGSRG4 Instrumentational OP Amps applications.

Differentiator circuits
Logarithmic operation circuits
Exponential operation circuits
Multiplication circuits
Division circuits
Precision measurement
Power control
Information processing
Weak signal detection
Signal amplification

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step4：Individual Package

Step5：Anti-collision Filling

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.