ADI OP282GS

Manufacturer No:

OP282GS

Manufacturer:

ADI

Package:

8-SOIC (0.154, 3.90mm Width)

Description:

2 Channels 12mA per Channel 3pA 90 dB Instrumentational OP Amps 0.0005μA 18V 9V~36V ±4.5V~18V OP282 8 Pins 8-SOIC (0.154, 3.90mm Width)

Quantity:

Delivery:

Payment:

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

OP282GS information

ADI OP282GS technical specifications, attributes, parameters and parts with similar specifications to ADI OP282GS.

Type
Parameter

Mounting Type
Surface Mount

Package / Case
8-SOIC (0.154, 3.90mm Width)

Surface Mount
YES

Number of Pins
8

Operating Temperature
-40°C~90°C

Packaging
Tube

JESD-609 Code
e0

Pbfree Code
no

Part Status
Obsolete

Moisture Sensitivity Level (MSL)
1 (Unlimited)

Number of Terminations
8

ECCN Code
EAR99

Subcategory
Operational Amplifier

Technology
JFET

Terminal Position
DUAL

Terminal Form
GULL WING

Peak Reflow Temperature (Cel)
240

Number of Functions
2

Supply Voltage
15V

Time@Peak Reflow Temperature-Max (s)
20

Base Part Number
OP282

Pin Count
8

Operating Supply Voltage
18V

Number of Channels
2

Nominal Supply Current
250μA

Max Supply Current
500μA

Quiescent Current
250μA

Slew Rate
9V/μs

Architecture
VOLTAGE-FEEDBACK

Amplifier Type
J-FET

Common Mode Rejection Ratio
90 dB

Current - Input Bias
3pA

Voltage - Supply, Single/Dual (±)
9V~36V ±4.5V~18V

Output Current per Channel
12mA

Input Offset Voltage (Vos)
3mV

Gain Bandwidth Product
4MHz

Neg Supply Voltage-Nom (Vsup)
-15V

Unity Gain BW-Nom
4000 kHz

Voltage Gain
86.02dB

Average Bias Current-Max (IIB)
0.0005μA

Power Supply Rejection Ratio (PSRR)
92dB

Low-Offset
NO

Frequency Compensation
YES

Voltage - Input Offset
200μV

Settling Time
1.6 μs

Low-Bias
YES

Micropower
YES

Download datasheets and manufacturer documentation for ADI OP282GS.

OP282GS Overview

A 8-SOIC (0.154, 3.90mm Width) case is used to package the op amp. J-FET-type instrumentation amplifiers are used in this application. The case in which buffer amplifier is delivered is called a Tube case. It is estimated that there will be 8 terminations in the next few months. There are a total of 8 pins on this op amp. It is important to remember that this op amp should be operated at a voltage of 15V volts. It should be noted that this op amp is a type of Operational Amplifier device. There are 8 pins on this chip. In terms of the input offset voltage, instrumentation amplifier rates at 3mV. It is recommended that this electronic component be mounted using the Surface Mount mounting type. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~90°C . An 500μA volt supply current is needed for this linear amplifier to operate. Voltage gain should remain at 86.02dB. There are 2 channels on the operational amplifiers. The operating supply voltage of the buffer op amp is rated at 18V. There is a quiescent current of 250μA in this operational amplifier circuit.

OP282GS Features

8 Pins
supply voltage of 15V
86.02dB voltage gain

OP282GS Applications

There are a lot of Analog Devices Inc.
OP282GS Instrumentational OP Amps applications.

Addition operation circuits
Subtraction operation circuits
single/dual op amp sum and difference circuits
Integrator circuits
Differentiator circuits
Logarithmic operation circuits
Exponential operation circuits
Multiplication circuits
Division circuits
Precision measurement

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step4：Individual Package

Step5：Anti-collision Filling

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.