ADI OP282ARMZ

Manufacturer No:

OP282ARMZ

Manufacturer:

ADI

Package:

8-TSSOP, 8-MSOP (0.118, 3.00mm Width)

Description:

2 Channels 12mA per Channel 3pA 90 dB Instrumentational OP Amps 0.0005μA 18V 9V~36V ±4.5V~18V OP282 8 Pins 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)

Quantity:

Delivery:

Payment:

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

OP282ARMZ information

ADI OP282ARMZ technical specifications, attributes, parameters and parts with similar specifications to ADI OP282ARMZ.

Type
Parameter

Lifecycle Status
PRODUCTION (Last Updated: 1 month ago)

Factory Lead Time
8 Weeks

Mounting Type
Surface Mount

Package / Case
8-TSSOP, 8-MSOP (0.118, 3.00mm Width)

Surface Mount
YES

Number of Pins
8

Operating Temperature
-40°C~85°C

Packaging
Tube

JESD-609 Code
e3

Pbfree Code
no

Part Status
Active

Moisture Sensitivity Level (MSL)
1 (Unlimited)

Number of Terminations
8

ECCN Code
EAR99

Terminal Finish
Matte Tin (Sn)

Subcategory
Operational Amplifier

Terminal Position
DUAL

Terminal Form
GULL WING

Peak Reflow Temperature (Cel)
260

Number of Functions
2

Supply Voltage
15V

Terminal Pitch
0.65mm

Time@Peak Reflow Temperature-Max (s)
30

Base Part Number
OP282

Operating Supply Voltage
18V

Power Supplies
+-15V

Number of Channels
2

Operating Supply Current
500μA

Nominal Supply Current
250μA

Quiescent Current
250μA

Slew Rate
9V/μs

Architecture
VOLTAGE-FEEDBACK

Amplifier Type
J-FET

Common Mode Rejection Ratio
90 dB

Current - Input Bias
3pA

Voltage - Supply, Single/Dual (±)
9V~36V ±4.5V~18V

Output Current per Channel
12mA

Input Offset Voltage (Vos)
3mV

Bandwidth
4MHz

Neg Supply Voltage-Nom (Vsup)
-15V

Unity Gain BW-Nom
4000 kHz

Voltage Gain
86.02dB

Average Bias Current-Max (IIB)
0.0005μA

Power Supply Rejection Ratio (PSRR)
92dB

Low-Offset
NO

Frequency Compensation
YES

Voltage - Input Offset
200μV

Download datasheets and manufacturer documentation for ADI OP282ARMZ.

OP282ARMZ Overview

Packaged in a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case, the buffer op amp is ready to use. An op amp ic of the J-FET type. The op amp is delivered to you in a Tube case. There is a growing number of terminations approaching the number of 8. The pins on this board total to 8 in total. I would like to remind you that this buffer op amp should be powered by an 15V battery. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. A total of 8 pins are present on the instrumentation amplifier. There is an input offset voltage of 3mV for this buffer op amp. The mounting type that is recommended for this electrical part is Surface Mount. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~85°C . As long as the supply current of the chip does not exceed 500μA, this op amp ic can operate. 86.02dB should remain the voltage gain. As far as the device is concerned, buffer amplifier has 2 channels. The operating supply voltage of the buffer op amp is rated at 18V. Currently, linear amplifier is operating with a quiescent current of 250μA.

OP282ARMZ Features

8 Pins
supply voltage of 15V
86.02dB voltage gain

OP282ARMZ Applications

There are a lot of Analog Devices Inc.
OP282ARMZ Instrumentational OP Amps applications.

Integrator circuits
Differentiator circuits
Logarithmic operation circuits
Exponential operation circuits
Multiplication circuits
Division circuits
Precision measurement
Power control
Information processing
Weak signal detection

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step4：Individual Package

Step5：Anti-collision Filling

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.