NJR NJM082BV-TE2

Manufacturer No:

NJM082BV-TE2

Manufacturer:

NJR

Package:

SSOP

Description:

2 Channels 400pA 70 dB Instrumentational OP Amps 0.0004μA 18V 8 Pins SSOP

Quantity:

Delivery:

Payment:

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

NJM082BV-TE2 information

NJR NJM082BV-TE2 technical specifications, attributes, parameters and parts with similar specifications to NJR NJM082BV-TE2.

Type
Parameter

Package / Case
SSOP

Surface Mount
YES

JESD-609 Code
e6

Pbfree Code
yes

Number of Terminations
8

ECCN Code
EAR99

Terminal Finish
Tin/Bismuth (Sn/Bi)

Max Operating Temperature
85°C

Min Operating Temperature
-40°C

Subcategory
Operational Amplifier

Packing Method
TAPE AND REEL

Technology
BIPOLAR

Terminal Position
DUAL

Terminal Form
GULL WING

Peak Reflow Temperature (Cel)
260

Number of Functions
2

Supply Voltage
15V

Terminal Pitch
0.65mm

Time@Peak Reflow Temperature-Max (s)
NOT SPECIFIED

Pin Count
8

JESD-30 Code
R-PDSO-G8

Qualification Status
Not Qualified

Operating Supply Voltage
18V

Power Supplies
+-15V

Number of Channels
2

Nominal Supply Current
5.6mA

Slew Rate
13 V/μs

Architecture
VOLTAGE-FEEDBACK

Amplifier Type
OPERATIONAL AMPLIFIER

Common Mode Rejection Ratio
70 dB

Current - Input Bias
400pA

Input Offset Voltage (Vos)
15mV

Gain Bandwidth Product
3MHz

Neg Supply Voltage-Nom (Vsup)
-15V

Unity Gain BW-Nom
3000 kHz

Voltage Gain
106dB

Average Bias Current-Max (IIB)
0.0004μA

Low-Offset
NO

Frequency Compensation
YES

Max Dual Supply Voltage
18V

Low-Bias
YES

Min Dual Supply Voltage
4V

Bias Current-Max (IIB) @25C
0.0004μA

Length
4.4mm

Height Seated (Max)
1.45mm

RoHS Status
RoHS Compliant

Download datasheets and manufacturer documentation for NJR NJM082BV-TE2.

NJM082BV-TE2 Overview

Packaged in a SSOP case, the buffer op amp is ready to use. An op amp ic of the OPERATIONAL AMPLIFIER type. There is a growing number of terminations approaching the number of 8. The pins on this board total to 8 in total. I would like to remind you that this buffer op amp should be powered by an 15V battery. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. There is an input offset voltage of 15mV for this buffer op amp. 106dB should remain the voltage gain. As far as the device is concerned, buffer amplifier has 2 channels. For the buffer op amp to operate properly, it must be above the temperature of -40°C degrees Celsius. No temperature greater than 85°C should be used. The operating supply voltage of the buffer op amp is rated at 18V. For packing the buffer amplifier, the TAPE AND REEL-axis is adopted. As a rule of thumb, you should conduct this electronic part under a dual voltage supply of 18V volts.

NJM082BV-TE2 Features

8 Pins
supply voltage of 15V
106dB voltage gain

NJM082BV-TE2 Applications

There are a lot of New Japan Radio (NJR)
NJM082BV-TE2 Instrumentational OP Amps applications.

Integrator circuits
Differentiator circuits
Logarithmic operation circuits
Exponential operation circuits
Multiplication circuits
Division circuits
Precision measurement
Power control
Information processing
Weak signal detection

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step4：Individual Package

Step5：Anti-collision Filling

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.