ONSEMI NCV887000D1R2G

NCV887000D1R2G Overview

In the 8-SOIC (0.154, 3.90mm Width) package, the switching controller meets most application requirements. There is sufficient capacity to generate switching controller for outputs 1. There is a Tape & Reel (TR) solid enclosure around the pmic. With this function, you can deal with Transistor Driver dc switching's outputs (s). DC control operates at 3.2V~40V volts and has 3.2V~40V supply voltage. Suitable for working in an dc switcher that has a -40°C~150°C TJ. As it has a Surface Mount value, it can be used for general dc dc regulator. To provide efficient switching control, Current Limit, Enable is included in the dcdc regulator. A SWITCHING CONTROLLER analog integrated circuit is connected to the switch converters. DUAL are the position of the terminal of the switching converters. Various 8 terminations. This dc dc converter ic uses a variety of control techniques, including PULSE WIDTH MODULATION. There is a DC switcher's nominal voltage of 13.2V. In addition to "NCV8870", there are other relevant dc to dc converter ics you can find. There are 8 pins on switching converter. Specifically, switching converter falls under the Switching Regulator or Controllers category. DC regulator outputs 10.5V voltage based on test statistics. A starting point for a project is to note down the dc dc regulator's usual output current, which is 800mA. Voltage regulator dc to dc is designed to operate at 95 % duty cycle during power-ups and power-downs to ensure reliability. Because of DC switcher's Surface Mount, it is suitable for most prototype designs and applications. A frequency of 50kHz is set for the switching controller. Since the dc switcher's maximum input voltage is 40V, the voltage must be regulated accordingly. Voltage 3.2V must be supplied. An output current greater than 100μA cannot be provided by the dc switcher. Depending on the datasheet, the switching converter can output 2.5V volts at its peak. A voltage controller's lowest output voltage cannot be less than 300mV.

NCV887000D1R2G Features

Transistor Driver Outputs
Current Limit, Enable
PULSE WIDTH MODULATION
Max Duty Cycle: 95 %
Frequency: 50kHz

NCV887000D1R2G Applications

There are a lot of ON Semiconductor
NCV887000D1R2G DC to DC converter applications.

• Network technology
• Automation technology
• CMM
• Various precision measuring instruments
• Various precision measuring detectors
• Flaw detection equipment
• Balance equipment
• Industrial robots
• Industrial controllers
• Die casting equipment