ONSEMI NCV7702BDWR2G

Manufacturer No:

NCV7702BDWR2G

Manufacturer:

ONSEMI

Package:

24-SOIC (0.295, 7.50mm Width)

Description:

Motor Driver, Dual H-Bridge, 1.0 A

Quantity:

Delivery:

Payment:

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

NCV7702BDWR2G information

ONSEMI NCV7702BDWR2G technical specifications, attributes, parameters and parts with similar specifications to ONSEMI NCV7702BDWR2G.

Type
Parameter

Package Type
SOIC−24 WB

MSL Type
3

MSL Temp (°C)
260

Container Type
REEL

Container Qty.
1000

Number of Drivers
4

V(BR)GSS Max (V)
-

V(BR)DSS Max (V)
-

rDS(on) Max (Ω)
-

Tj Max (°C)
150

Case Outline
0.0751

VCC Max (V)
16

ID Max (A)
-

Download datasheets and manufacturer documentation for ONSEMI NCV7702BDWR2G.

Datasheet:

eab2bcecc0dc00f2600bfb0000eeba0b.pdf

Package Drawing:

ee0dea13f246c31d26a599921cf45575.pdf

This dual full−bridge driver IC is intended for 14 V automotive stepper and DC motor applications. Its four half−bridge outputs are configured as two channels and are programmed by six TTL compatible inputs, allowing flexible control of bridge operation. The device operates in standby mode, run mode, or brake mode and typically consumes less than 1 uA while in standby. In run mode, each half−bridge output can deliver load current in either direction. Brake mode activates the low side transistors or high side transistors at the selected outputs. On−chip recirculation diodes are provided, and the IC has multiple fault protection modes. Overcurrent detection protects against shorted loads between outputs and shorts to supply or ground at each output. An overcurrent fault condition activates an internal timer, which modulates faulted outputs at low duty cycle. An overcurrent condition in one channel does not affect operation in the other. Overvoltage and overtemperature detection are also provided, and turn off all bridge outputs during these fault conditions. Recovery from all fault conditions is automatic; the IC will resume normal operation in its previously selected mode upon fault resolution. Diagnostic ability is provided by two open−collector STATUS outputs which report the fault status of each channel independently during overcurrent faults, and together during overvoltage or overtemperature faults.

Application

DC or Stepper Motors
Relays or Solenoids
Unipolar or Bipolar Loads

End Product

Automotive

Feature

Single 7 V to 16 V Supply
Low Standby Current: < 1.0 µA Typical
3.3 V / 5 V Compatible Inputs
Independent Channel Enable
Full-Bridge, Half-Bridge, High Side or Low Side Drive
On-Chip Recirculation Diodes
Fault Protection with Automatic Recovery
Overcurrent Protection
Overvoltage Protection
Overtemperature Protection
Fault Diagnostic STATUS Outputs
Internally Fused Leads in SO24L Package
AEC Qualified
PPAP Capable

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step4：Individual Package

Step5：Anti-collision Filling

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.