ONSEMI NCV3020ADR2G

NCV3020ADR2G Overview

As a result of 8-SOIC (0.154, 3.90mm Width) compact design, the switching controller is compatible with most applications. 1 outputs are supported by the dc motor controller. An enclosure of Tape & Reel (TR) is used to package the PMIC. The system can process Transistor Driver dc switching's outputs (s). 4.7V~28V is the supply voltage and the operating voltage of the dc control. Workable in an dc switcher where -40°C~125°C TJ is the -40°C~125°C TJrm. The switching controller is capable of switching at the 300kHz position. dc dc regulator can be generalized using Surface Mount. Connected to a SWITCHING CONTROLLER analog IC, the switch converters are connected to a power supply. switching converters terminal (s) are designed to be at DUAL. There are many different types of terminations for 8. Some of the control techniques used by these dc dc converter ics are PULSE WIDTH MODULATION. It is inputted with a DC switcher's voltage of 12V. A search for "NCV3020" will reveal other relevant dc to dc converter ics. 8 pins are present on switching converter. The type is a particular Switching Regulator or Controllers of switching converter. Input voltage of dc dc voltage regulator must be 4.7V. Statistically, the DC regulator outputs 600mV voltage. It's important to remember that the dc dc regulator's normaloutput current is 130mA, so you should note it down when starting a new project. The maximum duty cycle of this voltage regulator dc to dc is set to 84 % to ensure reliability during power-up and power-down. As DC switcher has a Surface Mount, it's suitable for most applications and prototype designs. DC regulators have a maximum frequency of 360kHz. There are several dc to dc voltage regulator in the Automotive, AEC-Q100 series. The supply current of the voltage controller is 11mA. There is a possibility that a current higher than 11mA will cause improper operation of the component and possibly damage switching voltage regulators. This the controllers dc receives a 11mA nominal current supply.

NCV3020ADR2G Features

Transistor Driver Outputs
Switching Frequency: 300kHz
PULSE WIDTH MODULATION
Max Duty Cycle: 84 %

NCV3020ADR2G Applications

There are a lot of ON Semiconductor
NCV3020ADR2G DC to DC converter applications.

• Automation technology
• CMM
• Various precision measuring instruments
• Various precision measuring detectors
• Flaw detection equipment
• Balance equipment
• Industrial robots
• Industrial controllers
• Die casting equipment
• Injection molding machinery