NXP MKE02Z64VLC2

MKE02Z64VLC2 Description

The Kinetis MKE02Z64VLC2 sub-family serves as the portfolio's entry point and is pin compatible with both the Our 8-bit S08P family and the Kinetis E series. A strong selection of analog, communication, timing and control peripherals with a certain flash memory size and pin count is included in this subfamily. The family offers programmers a suitable entry-level 32-bit solution that is low-power, highly resilient, and reasonably priced. The family is a next-generation MCU solution with improved ESD/EMC performance for applications using high-reliability, cost-sensitive devices in situations with a lot of electrical noise.

MKE02Z64VLC2 Features

• System peripherals

– Power management module (PMC) with three power modes: Run, Wait, Stop

– Low-voltage detection (LVD) with reset or interrupt, selectable trip points

– Watchdog with independent clock source (WDOG)

– Programmable cyclic redundancy check module (CRC)

– Serial wire debug interface (SWD)

– Bit manipulation engine (BME)

• Security and integrity modules

– 64-bit unique identification (ID) number per chip

• Human-machine interface

– Up to 57 general-purpose input/output (GPIO)

– Two up to 8-bit keyboard interrupt modules (KBI)

– External interrupt (IRQ)

• Analog modules

– One up to 16-channel 12-bit SAR ADC, operation in Stop mode, optional hardware trigger (ADC)

– Two analog comparators containing a 6-bit DAC and programmable reference input (ACMP)

• Timers

– One 6-channel FlexTimer/PWM (FTM)

– Two 2-channel FlexTimer/PWM (FTM)

– One 2-channel periodic interrupt timer (PIT)

– One real-time clock (RTC)

• Operating characteristics

– Voltage range: 2.7 to 5.5 V

– Flash write voltage range: 2.7 to 5.5 V

– Temperature range (ambient): -40 to 105°C

• Performance

– Up to 20 MHz Arm? Cortex-M0+ core

– Single cycle 32-bit x 32-bit multiplier

– Single cycle I/O access port

• Memories and memory interfaces

– Up to 64 KB flash

– Up to 256 B EEPROM

– Up to 4 KB RAM

• Clocks

– Oscillator (OSC) - supports 32.768 kHz crystal or 4 MHz to 20 MHz crystal or ceramic resonator; choice of low power or high gain oscillators

– Internal clock source (ICS) - internal FLL with internal or external reference, 31.25 kHz pretrimmed internal reference for 16 MHz system clock (able to be trimmed for up to 20 MHz system clock)

– Internal 1 kHz low-power oscillator (LPO)

MKE02Z64VLC2 Applications

• Automotive

• Heating Ventilation, and Air Conditioning (HVAC)

• Motorcycle Engine Control Unit (ECU) and Small Engine Control

• Industrial

• 3-Phase AC Induction Motor

• Air Conditioning (AC)

• Brushless DC Motor (BLDC) Control

• Building Safety

• Electricity Grid and Distribution

• Electricity Meter

• Gas Meter

• Heat Metering

• Motion Control and Robotics

• Motor Drives

• Permanent Magnet Synchronous Motor (PMSM)

• Smart Lighting

• Smart Power Socket and Light Switch

• Surround View

• Water Meter