NXP MK64FN1M0VLL12R

MK64FN1M0VLL12R Description

The Kinetis K series MCU portfolio offers the broadest selection of pin, peripheral- and software-compatible MCU families based on the ARM Cortex -M4 core. The Kinetis K64 120 MHz MCUs feature: IEEE 1588 Ethernet MCUs Optimization for applications requiring large memory densities and low-power processing efficiency Crystal-less USB design for reduced system cost and board space The comprehensive enablement and scalability of the Kinetis portfolio

MK64FN1M0VLL12R Features

• Ultra-Low-Power

  Full memory and analog operation down to 1.71 volts for extended battery life

  Low-power timer for continual system operation in reduced power state

  Flexible low-power modes with power and clock gating for optimal peripheral activity and recovery times.

  Low-leakage wake-up unit with up to seven internal modules and 16 pins as wake-up sources in low-leakage stop (LLS)/very low-leakage stop (VLLS) modes

• Flash, SRAM, and FlexMemory

  256 KB of SRAM

  Up to 1 MB flash. Fast access, high reliability with four-level security protection

  FlexMemory: Up to 4 KB of user-segmentable byte write/erase EEPROM for data tables/system data. EEPROM with over 10M cycles and flash with 70 μsec write time (brownouts without data loss/corruption). No user or system intervention to complete programming and erase functions and full operation down to 1.71 volts. In addition, up to 128KB of FlexNVM for extra program code, data or EEPROM backup

• Mixed-Signal Capability
  

  Two 12-bit digital-to-analog converters (DACs) for analog waveform generation for audio applications

  Three high-speed comparators providing fast and accurate motor over-current protection by driving PWMs to a safe state

  Analog voltage reference provides an accurate reference to analog blocks, ADC and DAC, and replaces external voltage references to reduce system cost

  Two high-speed, 16-bit analog-to-digital converters (ADCs) with configurable resolution. Single or operation for improved noise rejection. 500 ns conversion time  achievable with programmable delay block triggering

• Performance

  Cross bar switch enables concurrent multi-master bus accesses, increasing bus bandwidth

  Up to 16-channel DMA for peripheral and memory servicing with reduced CPU loading and faster system throughput

  ARM Cortex-M4 core + DSP. 120 MHz, single-cycle MAC, single instruction multiple data (SIMD) extensions, single precision floating point unit

  Independent flash banks allow concurrent code execution and firmware updating with no performance degradation or complex coding routines

• Timing and Control

  Carrier modulator timer for infrared waveform generation in remote control applications

  Up to four FlexTimers with a total of 20 channels. Hardware dead-time insertion and quadrature decoding for motor control

  Four-channel 32-bit periodic interrupt timer provides time base for RTOS task scheduler or trigger source for ADC conversion and programmable delay block

• Human-Machine Interface (HMI)

  GPIO with pin interrupt support

MK64FN1M0VLL12R Applications

• Industrial

• Enterprise systems

• Communications equipment