Microchip MIC5891YN

Manufacturer No:

MIC5891YN

Manufacturer:

Microchip

Package:

16-DIP (0.300, 7.62mm)

Description:

8-Bit Serial Input Latched Driver

Quantity:

Delivery:

Payment:

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

MIC5891YN information

Microchip MIC5891YN technical specifications, attributes, parameters and parts with similar specifications to Microchip MIC5891YN.

Type
Parameter

Type
Source

Output Channels
8

Vout Operating (V) - Transient
50

Vout Operating (V) - Sustained
35

Iout (mA) per Channel
-500

Output Structure
Darlington Open Emitter

Input Structure
Serial

Minimum Data Clock (MHz)
5

General Description
8-Bit SRs (Cascadable), Operable w/Split Supply (to -20V), 5MHz (min) Data@5V, Integ. Clamp Diodes; TTL/CMOS/PMOS/NMOS Logic; Strobe and Output Enable

Package
16/SOIC 300mil 16/PDIP

Download datasheets and manufacturer documentation for Microchip MIC5891YN.

Data Sheets:

4b35d7c122c2f97343a13d85e0a51d4f.pdf

The MIC5891 latched driver is a high-voltage, high current integrated circuit comprised of eight CMOS data latches, CMOS control circuitry for the common STROBE and OUTPUT ENABLE, and bipolar Darlington transistor drivers for each latch. Bipolar/MOS construction provides extremely low power latches with maximum interface flexibility. The MIC5891 will typically operate at 5MHz with a 5V logic supply. The CMOS inputs are compatible with standard CMOS, PMOS, and NMOS logic levels. TTL circuits may be used with appropriate pull-up resistors to ensure a proper logic-high input. A CMOS serial data output allows additional drivers to be cascaded when more than 8 bits are required. The MIC5891 has open-emitter outputs with suppression diodes for protection against inductive load transients. The output transistors are capable of sourcing 500mA and will sustain at least 35V in the on-state. Simultaneous operation of all drivers at maximum rated current requires a reduction in duty cycle due to package power limitations. Outputs may be paralleled for higher load current capability. The MIC5891 is available in a 16-pin plastic DIP package (N) and 16-pin wide SOIC package (WM).

High-voltage, high-current outputs
Output transient protection diodes
CMOS-, PMOS-, NMOS-, and TTL-compatible inputs
5MHz typical data input rate
Low-power CMOS latches

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step4：Individual Package

Step5：Anti-collision Filling

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.