Microchip MD0101K6-G

Manufacturer No:

MD0101K6-G

Manufacturer:

Microchip

Package:

18-VFDFN Exposed Pad

Description:

HIGH VOLTAGE PROTECTION T/R SWITCH w/CLAMP DIODES

Quantity:

Delivery:

Payment:

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

MD0101K6-G information

Microchip MD0101K6-G technical specifications, attributes, parameters and parts with similar specifications to Microchip MD0101K6-G.

Type
Parameter

# of Channels
4

Voltage (V)
±100

Diode Clamps
Yes

VTRIP (V)
±2.0

BW (MHz)
100

Package
DFN-8

Download datasheets and manufacturer documentation for Microchip MD0101K6-G.

Data Sheets:

d76d7d24c07694f9bb391c57eb2feeda.pdf

User Guide:

b5ce576d5c36b99a434419fb69f65772.pdf

MD0101 is a four channel, high voltage, current limiting protection device. It is designed to protect a low noise receiver from the high voltage transmit pulses in ultrasound applications and is commonly referred to as a T/R (transmit and receive) switch. Each channel has three terminals; Tx, Rx, and RGND. The analog switch terminals are Tx and Rx. Rx has integrated clamping diodes to RGND to protect the receiver against high voltages. Voltages greater than ±0.6V will start forward biasing the clamp diodes to RGND. The MD0101 can be considered as a normally closed switch with a typical switch resistance of 15O, allowing small signals to pass. Once the voltage drop across the switch exceeds a nominal value of ±1.0V, the device will start to turn off. In the off state, the MD0101 can withstand up to ±100V across its terminals. A small amount of current, 200µA, is allowed to flow through. The MD0101 is not limited to just ultrasound applications. It can also be used for resettable fuses to protect power lines, output short circuit protection, and data acquisition. The MD0101 is available in an 18-Lead, 5x5mm DFN package as a four channel device for high density requirements.

Up to ±100V input voltage protection
Low on resistance - 15O typical
Integrated clamp diodes
Fast switching speed
Four electrically isolated channels
No external supplies needed

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step4：Individual Package

Step5：Anti-collision Filling

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.