Microchip MCP14A0301-E/SN

Manufacturer No:

MCP14A0301-E/SN

Manufacturer:

Microchip

Package:

8-SOIC (0.154, 3.90mm Width)

Description:

3 A MOSFET Gate Driver with Low Threshold Input and Enable

Quantity:

Delivery:

Payment:

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

MCP14A0301-E/SN information

Microchip MCP14A0301-E/SN technical specifications, attributes, parameters and parts with similar specifications to Microchip MCP14A0301-E/SN.

Type
Parameter

MOSFET Driver Type
Low Side

Configuration
Inverting

Maximum Supply Voltage (V)
18

Peak Source Output (A)
3

Peak Sink Output (A)
3

Source Resistance (Ω)
2.2

Sink Resistance (Ω)
1.5

Propagation Delay tD1 (ns)
15

Propagation Delay tD2 (ns)
18

Rise Time (tR, ns)
13

Fall Time (tF, ns)
12

Capacitive Load Drive
1000 pF in 13 ns

Download datasheets and manufacturer documentation for Microchip MCP14A0301-E/SN.

Data Sheets:

baabe4c283fa28718b1307dcfc26ffd3.pdf

Application Notes:

0e9c9fff59bc5f0338926158216f7f5c.pdf

The MCP14A0301/2 are high-speed MOSFET gate drivers that are capable of providing up to 3.0 A of peak current while operating from a single 4.5 V to 18 V supply. The inverting (MCP14A0301) or non-inverting (MCP14A0302) single channel output is directly controlled from either TTL or CMOS (2 V to 18 V) logic. These devices also feature low shoot-through current, matched rise and fall times, and short propagation delays which make them ideal for high switching frequency applications.

The MCP14A0301/2 MOSFET gate drivers offer enhanced control with Enable functionality. The active-high Enable pin can be driven low to drive the output of the MCP14A0301/2 low, regardless of the status of the Input pin. An integrated pull-up resistor allows the user to leave the Enable pin floating for standard operation.

Additionally, the MCP14A0301/2 devices feature separate ground pins (AGND and GND), allowing greater noise isolation between the level-sensitive Input/ Enable pins and the fast, high-current transitions of the push-pull output stage.

These devices are highly latch-up resistant under any condition within their power and voltage ratings. They can accept up to 500 mA of reverse current being forced back into their outputs without damage or logic upset. All terminals are fully protected against electrostatic discharge (ESD) up to 1.75 kV (HBM) and 200 V (MM).

High Peak Output Current: 3.0 A (typical)

4.5 V to 18 V

Low Shoot-Through/Cross-Conduction Current in Output Stage

1,800 pF in 13 ns (typical)

Short Delay Times: t_D1 = 15 ns, t_D2 = 18 ns (typical)

Low Supply Current: 360 µA (typical)

Low-Voltage Threshold Input and Enable with Hysteresis

Latch-Up Protected: Withstands 500 mA Reverse Current

8-Lead MSOP

8-Lead SOIC

8-Lead 2 x 2 WDFN

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step4：Individual Package

Step5：Anti-collision Filling

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.