NXP MC9S08DZ32ACLC
NXP MC9S08DZ32ACLC

NXP MC9S08DZ32ACLC

Manufacturer No:

MC9S08DZ32ACLC

Manufacturer:

NXP

Package:

32-LQFP

Description:

32KB 32K x 8 FLASH S08 8-Bit Microcontroller S08 Series MC9S08DZ32 32-LQFP

Delivery:

DHL
DHL
DHL
DHL

Payment:

DHL
DHL
DHL
DHL
DHL
DHL
DHL

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

MC9S08DZ32ACLC information

NXP MC9S08DZ32ACLC technical specifications, attributes, parameters and parts with similar specifications to NXP MC9S08DZ32ACLC.

  • Type
  • Parameter
  • Factory Lead Time
  • 10 Weeks
  • Mounting Type
  • Surface Mount
  • Package / Case
  • 32-LQFP
  • Supplier Device Package
  • 32-LQFP (7x7)
  • Operating Temperature
  • -40°C~85°C TA
  • Packaging
  • Tray
  • Series
  • S08
  • Published
  • 1996
  • Part Status
  • Active
  • Moisture Sensitivity Level (MSL)
  • 3 (168 Hours)
  • Base Part Number
  • MC9S08DZ32
  • Oscillator Type
  • External
  • Number of I/O
  • 25
  • Speed
  • 40MHz
  • RAM Size
  • 2K x 8
  • Voltage - Supply (Vcc/Vdd)
  • 2.7V~5.5V
  • Core Processor
  • S08
  • Peripherals
  • LVD, POR, PWM, WDT
  • Program Memory Type
  • FLASH
  • Core Size
  • 8-Bit
  • Program Memory Size
  • 32KB 32K x 8
  • Connectivity
  • CANbus, I2C, LINbus, SCI, SPI
  • Data Converter
  • A/D 10x12b
  • EEPROM Size
  • 1K x 8

Download datasheets and manufacturer documentation for NXP MC9S08DZ32ACLC.

Datasheets:

Environmental Information:

PCN Packaging:

MC9S08DZ32ACLC  Description


The MC9S08DZ32ACLC is an 8-bit Embedded CAN Microcontroller with CISC architecture that operates at a maximum frequency of 40MHz. It is based on an enhanced HCS08 CPU (20MHz bus). It incorporates 32kB internal flash, 2kB internal RAM, an analogue comparator, a can, a 10-channel 12-bit A/D converter and 26 general-purpose I/O pins. 



MC9S08DZ32ACLC Features


  • HC08 Instruction set with added BGND instruction

  • Support for up to 32 Interrupt/reset sources

  • Two very low-power stop modes

  • Reduced power wait mode

  • Very low power real-time interrupt for use in the run, wait and stop

  • Loop-control Pierce oscillator (XOSC)

  • Multi-purpose clock generator (MCG)

  • Watchdog computer operating properly (COP) reset

  • Low-voltage detection with reset or interrupt - selectable trip points

  • Illegal opcode detection with reset

  • Illegal address detection with reset

  • Flash block protect

  • Loss-of-lock protection

  • MSCAN - CAN protocol version 2.0 A, B

  • Two SCIs supporting LIN 2.0 protocol and SAE J2602 protocols

  • Loop-control Pierce oscillator (XOSC)

  • Multi-purpose clock generator (MCG)

  • Watchdog computer operating properly (COP) reset

  • Low-voltage detection with reset or interrupt - selectable trip points

  • Illegal opcode detection with reset

  • Illegal address detection with reset

  • Flash block protect

  • Loss-of-lock protection

  • MSCAN - CAN protocol version 2.0 A, B

  • Two SCIs supporting LIN 2.0 protocol and SAE J2602 protocols

  • 24 Interrupt pins with selectable polarity on each pin

  • Hysteresis and configurable pull device on all input pins

  • Configurable slew rate and drive strength on all output pins

  • Single-wire background debug interface

  • On-chip, in-circuit emulation (ICE) with real-time bus capture



MC9S08DZ32ACLC Applications


  • Industrial

  • Embedded Design & Development


User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step1：Prepare product

Step2：Desiccant Protection

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step3：Vacuum Packaging

Step4：Individual Package

Step4：Individual Package

Step5：Anti-collision Filling

Step5：Anti-collision Filling

Step6：Packaging Box

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.

MC9S08DZ32ACLC Relevant information

The following parts are popular search parts in Integrated Circuits (ICs).