ADI MAX9634HERS+T

Manufacturer No:

MAX9634HERS+T

Manufacturer:

ADI

Package:

4-WFBGA, CSPBGA

Description:

1 Channels 130 dB Instrumentational OP Amps MAX9634 4-WFBGA, CSPBGA

Quantity:

Delivery:

Payment:

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

MAX9634HERS+T information

ADI MAX9634HERS+T technical specifications, attributes, parameters and parts with similar specifications to ADI MAX9634HERS+T.

Type
Parameter

Factory Lead Time
8 Weeks

Mount
Surface Mount

Mounting Type
Surface Mount

Package / Case
4-WFBGA, CSPBGA

Number of Pins
4

Operating Temperature
-40°C~85°C

Packaging
Tape & Reel (TR)

Series
nanoPower

Published
2010

Part Status
Active

Moisture Sensitivity Level (MSL)
1 (Unlimited)

Number of Terminations
4

ECCN Code
EAR99

Additional Feature
RESET THRESHOLD VOLTAGE IS 28.5V

Terminal Position
BOTTOM

Terminal Form
BALL

Number of Functions
1

Supply Voltage
3.6V

Terminal Pitch
0.5mm

Base Part Number
MAX9634

Number of Channels
1

Max Supply Voltage
30V

Min Supply Voltage
1.6V

Analog IC - Other Type
POWER SUPPLY SUPPORT CIRCUIT

Adjustable Threshold
NO

Amplifier Type
Current Sense

Common Mode Rejection Ratio
130 dB

Input Offset Voltage (Vos)
100μV

Bandwidth
125 kHz

Max Dual Supply Voltage
30V

Height Seated (Max)
0.69mm

REACH SVHC
Unknown

Radiation Hardening
No

RoHS Status
RoHS Compliant

Download datasheets and manufacturer documentation for ADI MAX9634HERS+T.

MAX9634HERS+T Overview

There is a 4-WFBGA, CSPBGA case in which the instrumentation amplifier is packaged. Buffer amps of this type are called Current Sense-types. A Tape & Reel (TR) case is used to deliver the buffer op amp. The number of terminations is approaching the 4 mark. The linear amplifier should be run at 3.6V at all times, so please keep that in mind when using it. 4 pins are included on the operational amplifiers. As far as the input offset voltage is concerned, linear amplifier rates at 100μV. For this electronic part, it is recommended that you mount it with type Surface Mount. It is important to note that this linear amplifier works well at a temperature of -40°C~85°C when it comes to operating temperatureIt is possible to operate this buffer amplifier from a supply current of 1.1μA . Op amp ic has 1 channels. The electrical part is capable of being powered by a voltage of under 30V, which means that it can be used with any voltage supply. As a rule of thumb, the supply voltage of the op amp should not be lower than 1.6V. As a general rule, you should conduct this electronic component under dual supply voltages of 30V volts. The nanoPower represents the op amp's series number. An analog IC known as a POWER SUPPLY SUPPORT CIRCUIT is the other type of IC that is used in this op amp ic. As an additional benefit of this buffer amplifier, please refer to the following: RESET THRESHOLD VOLTAGE IS 28.5V.

MAX9634HERS+T Features

supply voltage of 3.6V

MAX9634HERS+T Applications

There are a lot of Maxim Integrated
MAX9634HERS+T Instrumentational OP Amps applications.

Subtraction operation circuits
single/dual op amp sum and difference circuits
Integrator circuits
Differentiator circuits
Logarithmic operation circuits
Exponential operation circuits
Multiplication circuits
Division circuits
Precision measurement
Power control

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step4：Individual Package

Step5：Anti-collision Filling

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.