ADI MAX9010EXT+T
Manufacturer No:
MAX9010EXT+T
Manufacturer:
Package:
6-TSSOP, SC-88, SOT-363
Description:
Surface Mount Tape & Reel (TR) 40mA mA Linear Comparators 69.54dB dB 500nA pA 2002 2.1mA ?A 5mV mV Surface Mount
Quantity:
Delivery:
Payment:
In Stock :Available
Price not displayed? Please send an RFQ, and we will respond immediately.
MAX9010EXT+T information
ADI MAX9010EXT+T technical specifications, attributes, parameters and parts with similar specifications to ADI MAX9010EXT+T.
- Type
- Parameter
- Factory Lead Time
- 6 Weeks
- Contact Plating
- Gold
- Mount
- Surface Mount
- Mounting Type
- Surface Mount
- Package / Case
- 6-TSSOP, SC-88, SOT-363
- Number of Pins
- 6
- Operating Temperature
- -40°C~85°C
- Packaging
- Tape & Reel (TR)
- Published
- 2002
- JESD-609 Code
- e4
- Pbfree Code
- yes
- Part Status
- Active
- Moisture Sensitivity Level (MSL)
- 1 (Unlimited)
- Number of Terminations
- 6
- ECCN Code
- EAR99
- Type
- General Purpose
- Subcategory
- Comparator
- Max Power Dissipation
- 245mW
- Technology
- BIPOLAR
- Terminal Position
- DUAL
- Terminal Form
- GULL WING
- Peak Reflow Temperature (Cel)
- 260
- Number of Functions
- 1
- Supply Voltage
- 5V
- Pin Count
- 6
- Output Type
- TTL
- Operating Supply Voltage
- 5V
- Number of Elements
- 1
- Nominal Supply Current
- 2.1mA
- Output Current
- 40mA
- Max Supply Current
- 2.1mA
- Propagation Delay
- 9 ns
- Quiescent Current
- 2.1mA
- Common Mode Rejection Ratio
- 82 dB
- Voltage - Supply, Single/Dual (±)
- 4.5V~5.5V
- Input Offset Voltage (Vos)
- 5mV
- Voltage Gain
- 69.54dB
- Average Bias Current-Max (IIB)
- 2?A
- Power Supply Rejection Ratio (PSRR)
- 82dB
- Supply Voltage Limit-Max
- 6V
- Max Input Current
- 500nA
- Input Bias Current
- 500nA
- Voltage - Input Offset (Max)
- 5mV @ 5.5V
- Current - Input Bias (Max)
- 0.5?A @ 5V
- CMRR, PSRR (Typ)
- 95dB CMRR, 82dB PSRR
- Length
- 2mm
- REACH SVHC
- Unknown
Download datasheets and manufacturer documentation for ADI MAX9010EXT+T.
Datasheets:
ConflictMineralStatement:
MAX9010EXT+T Overview
In order to make transportation easier, it is packaged in 6-TSSOP, SC-88, SOT-363 .A comparator with an output type of TTL is being used.We ship the part through Tape & Reel (TR) .As you can see, the comparator has6 terminals.Electronic comparator is a part of Comparator family.Electronic comparator is capable of performing numerous tasks when powered by 5V voltage.In general, the chip type can be classified as General Purpose .A total of 1 elements can be found in it.A total of 6 pins are included.A Surface Mount mounting type is recommended.A temperature setting of -40°C~85°C should be used for the operating temperature in order to prevent malfunctions.The comparator consists of 6 pins.Alternatively, you may search for MAX9010 to find more pin-to-pin solutions for your specific needs.There is 2.1mA current flowing in this comparator.There is a Surface Mount on the board for mounting to a PCB or other board.Electronic comparator is recommended that the nominal supply current of the device be 2.1mA .A current supply greater than 2.1mA may cause the comparator to malfunction.Electronic comparator is possible to input a maximum of 500nA current into the device.Comparator electronics follows that the voltage gain of the part is 69.54dB .For normal operation, there should be 5V operating supply voltage applied.
MAX9010EXT+T Features
TTL output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 2.1mA
Voltage Gain: 69.54dB
MAX9010EXT+T Applications
There are a lot of Maxim Integrated
MAX9010EXT+T linear comparators applications.
- Current and voltage sensing
- Analog front end
- Power management
- Point of load regulators
- DC/DC and AC/DC power supplies
- System control and monitoring
- Wearable Devices
- Mobile Phones and Tablets
- Battery-Powered Electronics
- General Purpose Low Voltage Applications
User Guide
Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.
MEANS OF PAYMENTFor your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.
RFQ (REQUEST FOR QUOTATIONS)Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.
Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.
Step1：Prepare product
Step2：Desiccant Protection
Step3：Vacuum Packaging
Step4：Individual Package
Step5：Anti-collision Filling
Step6：Packaging Box
1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.
Currently, our products are shipped through DHL, FedEx, SF, and UPS.
DELIVERY TIME1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.
MAX9010EXT+T Relevant information
The following parts are popular search parts in Integrated Circuits (ICs).
AIChipLink – Your Trusted Electronic Components Distributor
12.28 M
Listed Part Number
3,000+
Leading Manufacturers
4.9 M
In-stock SKU
15,000+
Warehouse Area(㎡)